1. Manuals
  2. Brands
  3. Asus Manuals
  4. Motherboard
  5. CUR-DLS
  6. User manual

Asus CUR-DLS User Manual

Dual socket370 motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

®
CUR-DLS
Dual Socket370 Motherboard
USER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Asus CUR-DLS

Summary of Contents for Asus CUR-DLS

  • Page 1 ® CUR-DLS Dual Socket370 Motherboard USER’S MANUAL...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Asus Contact Information

    ASUS COMPUTER GmbH (Europe) Marketing Address: Harkortstr. 25, 40880 Ratingen, BRD, Germany Fax: +49-2102-442066 Email: sales@asuscom.de (for marketing requests only) Technical Support Hotline: MB/Others: +49-2102-9599-0 Notebook: +49-2102-9599-10 Fax: +49-2102-9599-11 Support (Email): www.asuscom.de/de/support (for online support) WWW: www.asuscom.de FTP: ftp.asuscom.de/pub/ASUSCOM ASUS CUR-DLS User’s Manual...

  • Page 4: Table Of Contents

    1. INTRODUCTION ................7 1.1 How This Manual Is Organized ..........7 1.2 Item Checklist ................7 2. FEATURES ..................8 2.1 The ASUS CUR-DLS ..............8 2.1.1 Specifications ..............8 2.1.2 Specifications–Optional Components ......9 2.1.3 Performance ..............10 2.1.4 Intelligence ..............
  • Page 5 4.5.1 Power Up Control ............58 4.5.2 Hardware Monitor ............60 4.6 Boot Menu ................61 4.7 Exit Menu ................. 63 5. OS Driver Installation ..............65 6. Software Reference ................99 7. APPENDIX ..................101 7.1 Glossary .................. 101 ASUS CUR-DLS User’s Manual...

  • Page 6: Federal Communications Commission Statement

    Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. ASUS CUR-DLS User’s Manual...

  • Page 7: Introduction

    (1) 68-pin LVD SCSI ribbon cable for Ultra160/Ultra2 devices with Terminator (1) Ribbon cable for a 3.5” floppy disk drive (1) Support drivers and utilities (1) This Motherboard User’s Manual Optional Items (1) Socket 370 CPU Terminator (required when installing only one CPU) ASUS CUR-DLS User’s Manual...

  • Page 8: Features

    2. FEATURES 2.1 The ASUS CUR-DLS The ASUS CUR-DLS motherboard is carefully designed for the demanding corpo- rate user who wants advanced features processed by the fastest processors for multi- server applications. 2.1.1 Specifications • Latest Intel Processor Support ®...

  • Page 9: Specifications-Optional Components

    • PCI/ISA Expansion Slots: 32-bit (33MHz) PCI (2/3) 64-bit (66/33MHz) PCI (depending on model) ASUS ASMC slot for IPMI compliant management solution • 4 USB Ports: Provides more options for additional peripherals. • SMBus: Features the System Management Bus interface, which is used to physi- cally transport commands and information between SMBus devices.

  • Page 10: Performance

    • ACPI Ready: ACPI (Advanced Configuration and Power Interface) is also imple- mented on all ASUS smart series motherboards. ACPI provides more Energy Saving Features for future operating systems (OS) supporting OS Direct Power Management (OSPM) functionality. With these features implemented in the OS, PCs can be ready around the clock, yet satisfy all the energy saving standards.

  • Page 11: Intelligence

    NT and Windows 2000, require much more memory and hard drive space to present enormous user interfaces and run large applications. The onboard hard- ware ASUS ASIC in conjunction Intel LDSM will warn the user before the sys- tem resources are used up to prevent possible application crashes. Suggestions will give the user information on managing their limited resources more effi- ciently.

  • Page 12: Cur-Dls Motherboard Components

    Wake-On-LAN Connector ....(see layout on next page) Wake-On-Ring Connector ....(see layout on next page) Hardware Monitoring System Voltage Monitoring (integrated in ASUS ASIC) ..14 (4) Fan Power & Speed Monitoring Connectors (see layout on next page) Power ATX Power Supply Connector ..........1...

  • Page 13: Component Locations

    2. FEATURES 2.2.1 Component Locations ASUS CUR-DLS User’s Manual...

  • Page 14: Hardware Setup

    3. HARDWARE SETUP 3.1 CUR-DLS Motherboard Layout 24.4cm (9.6in) PS/2 T: Mouse B: Keyboard CHA_FAN1 CPU_FAN1 Socket 370 Bottom: Top: USB1 RJ-45 USB2 COM1 ServerWorks (RCC) CUR-DLS NB6635 Socket 370 North Bridge COM2 CPU_FAN2 Digital Flat Panel USBPORT 3 & 4...

  • Page 15: Layout Contents

    25) SPEAKER (PANEL) p.30 System Warning Speaker Connector (4 pins) 26) IDELED (PANEL) p.30 IDE/SCSI Activity LED (2 pins) 27) ATXPWR p.31 ATX Power Supply Connector (20 pins) 28) SCSI-A/SCSI-B p.31 68-pin Ultra160/Ultra2 SCSI Connectors (Two 68 pins) ASUS CUR-DLS User’s Manual...

  • Page 16: Hardware Setup Procedure

    4. Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system. 5. Ensure that the ATX power supply is switched off before you plug in or remove the ATX power connector on the motherboard. ASUS CUR-DLS User’s Manual...

  • Page 17: System Memory (Dimm)

    16M x 4 Double-Sided Double-Sided & Stacked 128Mbit 32M x 4 Double-Sided Double-Sided & Stacked 128Mbit 16M x 8 Single-Sided Double-Sided 256Mbit 32M x 8 Single-Sided Double-Sided 256Mbit 64M x 4 Single-Sided Double-Sided & Stacked 1024 ASUS CUR-DLS User’s Manual...

  • Page 18: Dimm Installation

    60 Pins 20 Pins Lock CUR-DLS 168-Pin DIMM Sockets The DIMMs must be 3.3V “registered” for this motherboard. To determine the DIMM type, check the notches on the DIMMs (see figure below). The notches on the DIMM module will shift between left, center, or right to identify the type and also to prevent the wrong type from being inserted into the DIMM slot on the motherboard.

  • Page 19: Central Processing Unit (Cpu)

    Socket 370 Pentium III CUR-DLS Gold Arrow Socket 370 Terminator (Use when only one CPU is installed) CUR-DLS Socket 370 Silver Arrow IMPORTANT: An optional CPU terminator is required when installing only one CPU. ASUS CUR-DLS User’s Manual...

  • Page 20: Expansion Card Installation Procedure

    LSI SCSI PCI-5 PCI-6 PCI-7 Primary PCI Bus (33MHz) 64-bit 64-bit 32-bit 33MHz 33MHz 33MHz <896 33MHz 33MHz 33MHz <53C1010-33 ATI RageXL PCI-1 PCI-2 PCI-3 PCI-4 (none) 66MHz 66MHz <53C1010-66 32-bit 32-bit 32-bit 32-bit Intel 82559 ASUS CUR-DLS User’s Manual...

  • Page 21: Assigning Irqs For Expansion Cards

    PCI 13 PCI 14 PCI 15 5 (64-bit) PCI 05 PCI 15 PCI 13 PCI 14 6 (64-bit) PCI 06 PCI 14 PCI 15 PCI 13 7 (32-bit) PCI 07 PCI 13 PCI 14 PCI 15 ASUS CUR-DLS User’s Manual...

  • Page 22: Connectors

    This connection is for a standard keyboard using an PS/2 plug (mini DIN). This connector will not allow standard AT size (large DIN) keyboard plugs. You may use a DIN to mini DIN adapter on standard AT keyboards. PS/2 Keyboard (6-pin female) ASUS CUR-DLS User’s Manual...
  • Page 23 6) Serial Port Connectors (Teal/Turquoise 9-pin COM1/COM2) Two serial ports can be used for pointing devices or other serial devices. See Onboard Serial Port 1 in 4.2.2 I/O Device Configuration for settings. COM 1 COM 2 Serial Ports (9-pin male) ASUS CUR-DLS User’s Manual...
  • Page 24 USB port connectors. Connect the provided USB connector set to the header and mount it to an open slot on your chassis. CUR-DLS USBP2+ USBP3+ USBP2– USBP3– USB Power USB Power USBPORT CUR-DLS USB Header ASUS CUR-DLS User’s Manual...
  • Page 25 *Same as the “Chassis intrude” lead in the panel connectors CHASSIS CUR-DLS Chassis Open Alarm Lead 10) Floppy Disk Drive Connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connect- ing the single end to the board, connect the two plugs on the other end to the floppy drives.
  • Page 26 SCSI drive and select the boot disk through Boot Sequence in 4.6 Boot Menu. CUR-DLS NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. PIN 1 CUR-DLS IDE Connectors ASUS CUR-DLS User’s Manual...
  • Page 27 12) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. APPENDIX). The connector powers up the system when a wakeup packet or signal is received through the LAN card.
  • Page 28 CPU fan if these pins are incorrectly used. These are not jumpers, do not place jumper caps over these pins. CPU_FAN1 / CHA_FAN2 Rotation +12V CUR-DLS CHA_FAN1 / CPU_FAN2 +12V Rotation CUR-DLS 12-Volt Cooling Fan Power ASUS CUR-DLS User’s Manual...
  • Page 29 This shows the status of the NIC through a panel-mounted LED. 18) Status LED (2-pin) This shows the system status as programmed through ASUS ASIC. 19) System Management Interrupt Lead (2-pin) This allows the user to manually place the system into a suspend mode or “Green”...
  • Page 30 Chassis Signal lead, which occurs when a panel switch or light detec- tor is triggered. This function requires the optional ASUS CIDB chassis intru- sion module to be installed (see 7. APPENDIX). If the chassis intrusion lead is not used, a jumper cap must be placed over the pins to close the circuit.
  • Page 31 +5.0 Volts +12.0 Volts +5.0 Volts CUR-DLS ATX Power Connector 28) Two 68-pin Ultra160/Ultra2 SCSI Connectors This motherboard has two 68-Pin Ultra160/Ultra2 (depending on model) SCSI connectors; one for each of the two channels. Each channel can support a maxi- mum of 15 devices as specified by Ultra160/Ultra2 standards.

  • Page 32: Scsi Connection Notes

    68-pin Female Terminator Internal SCSI Devices (up to 15 devices) CUR-DLS SCSI Connection Example NOTE: Ultra160/Ultra2 devices do not have termination jumpers and must use a separate terminator on the last connector (internal) or device (external). ASUS CUR-DLS User’s Manual...

  • Page 33: Starting Up The First Time

    No DRAM installed or detected One long beep followed by Video card not found or video card three short beeps memory bad High frequency beeps when CPU overheated system is working System running at a lower frequency ASUS CUR-DLS User’s Manual...
  • Page 34 Shut Down, and then click Shut down the computer? The power supply should turn off after Windows shuts down. NOTE: The message “You can now safely turn off your computer” will not appear when shutting down with ATX power supplies. ASUS CUR-DLS User’s Manual...

  • Page 35: Bios Setup

    4. In DOS mode, type A:\AFLASH <Enter> to run AFLASH. IMPORTANT! If “unknown” is displayed after Flash Memory:, the memory chip is either not programmable or is not supported by the ACPI BIOS and there- fore, cannot be programmed by the Flash Memory Writer utility. ASUS CUR-DLS User’s Manual...

  • Page 36: Updating Bios Procedures

    BIOS revision will solve your problems. Care- less updating can result in your motherboard having more problems! 1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) (see ASUS CONTACT INFORMATION on page 3 for details) and save to the disk you created earlier.
  • Page 37 NOTE: When you see the message “Boot Block is different”, you may still press <Y> to update the BIOS. Yet if the update fails, your system will run a greater risk of boot failure depending on whether the boot block is damaged or not. ASUS CUR-DLS User’s Manual...
  • Page 38 If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need servicing. ASUS CUR-DLS User’s Manual...

  • Page 39: Bios Setup Program

    POST. NOTE: Because the BIOS software is constantly being updated, the following BIOS screens and descriptions are for reference purposes only and may not re- flect your BIOS screens exactly. ASUS CUR-DLS User’s Manual...

  • Page 40: Bios Menu Bar

    Brings up a selection menu for the highlighted field <Home> or <PgUp> Moves the cursor to the first field <End> or <PgDn> Moves the cursor to the last field <F5> Resets the current screen to its Setup Defaults <F10> Saves changes and exits Setup ASUS CUR-DLS User’s Manual...

  • Page 41: General Help

    Item Specific Help window located to the right of each menu. This window displays the help text for the currently highlighted field. NOTE: The item heading in square brackets represents the default setting for that field. ASUS CUR-DLS User’s Manual...

  • Page 42: Main Menu

    This is required to support older Japanese floppy drives. Floppy 3 Mode support will allow reading and writing of 1.2MB (as opposed to 1.44MB) on a 3.5-inch diskette. Configuration options: [Disabled] [Drive A] [Drive B] [Both] ASUS CUR-DLS User’s Manual...

  • Page 43: Primary & Secondary Master/Slave

    Primary IDE hard disk drives must have its partition set to active (also possible with FDISK). Other options for the Type field are: [None] - to disable IDE devices ASUS CUR-DLS User’s Manual...
  • Page 44 NOTE: To make changes to this field, the Type field must be set to [User Type HDD] and the Translation Method field must be set to [Manual]. ASUS CUR-DLS User’s Manual...
  • Page 45 IDE devices. Set to [Disabled] to suppress Ultra DMA capa- bility. NOTE: To make changes to this field, the Type field must be set to [User Type HDD]. Configuration options: [0] [1] [2] [3] [4] [Disabled] ASUS CUR-DLS User’s Manual...

  • Page 46: Keyboard Features

    [6/Sec] [8/Sec] [10/Sec] [12/Sec] [15/Sec] [20/Sec] [24/Sec] [30/Sec] Keyboard Auto-Repeat Delay [1/4 Sec] This field sets the time interval for displaying the first and second charac- ters. Configuration options: [1/4 Sec] [1/2 Sec] [3/4 Sec] [1 Sec] ASUS CUR-DLS User’s Manual...
  • Page 47 Configuration options: [All Errors] [No Error] [All but Keyboard] [All but Disk] [All but Disk/Keyboard] Installed Memory [XXX MB] This display-only field displays the amount of conventional memory detected by the system during bootup. You do not need to make changes to this field. ASUS CUR-DLS User’s Manual...

  • Page 48: Advanced Menu

    This functions as an update loader integrated into the BIOS to supply the processor with the required data. In the default position of [Enabled], the BIOS will load the update on all processors during system bootup. Configu- ration options: [Disabled] [Enabled] ASUS CUR-DLS User’s Manual...
  • Page 49 Configuration options: [Enabled] [Auto] OS/2 Onboard Memory > 64M [Disabled] When using OS/2 operating systems with installed DRAM of greater than 64MB, you need to set this option to [Enabled]; otherwise, leave this on [Disabled]. Configuration options: [Disabled] [Enabled] ASUS CUR-DLS User’s Manual...

  • Page 50: Chip Configuration

    IEEE-1394 PCI card. Con- figuration options: [Disabled] [Enabled] Onboard PCI IDE Enable [Both] You can select to enable the primary IDE channel, secondary IDE channel, both, or disable both channels. Configuration options: [Both] [Disabled] ASUS CUR-DLS User’s Manual...

  • Page 51: I/O Device Configuration

    UART to support the infrared module connector on the motherboard. If your system already has a second serial port connected to the onboard COM2 connec- tor, it will no longer work if you enable the infrared feature. Configuration options: [Disabled] [Enabled] ASUS CUR-DLS User’s Manual...
  • Page 52 This field allows you to configure the parallel port DMA channel for the selected ECP mode. This selection is available only if you select [ECP] or [ECP+EPP] in Parallel Port Mode above. Configuration options: [1] [3] [Disabled] ASUS CUR-DLS User’s Manual...

  • Page 53: Pci Configuration

    [Disabled] will disable the motherboard’s Symbios SCSI BIOS so that the BIOS on an add-on Symbios SCSI card can be used. If your Symbios SCSI card does not have a BIOS, the Symbios SCSI card will not function. Con- figuration options: [Auto] [Disabled] ASUS CUR-DLS User’s Manual...
  • Page 54 USB devices. Configuration options: [Disabled] [Enabled] ONB VGA BIOS First [No] This field, when set to [Yes], gives priority to the onboard VGA BIOS over other VGA controllers. Configuration options: [No] [Yes] ASUS CUR-DLS User’s Manual...

  • Page 55: Shadow Configuration

    ROMs on them, you will need to know which addresses the ROMs use to shadow them specifically. Shadowing a ROM reduces the memory available between 640K and 1024K by the amount used for this purpose. Configuration options: [Disabled] [Enabled] ASUS CUR-DLS User’s Manual...

  • Page 56: Power Menu

    Windows 3.x and Windows 95, you need to install Windows with the APM feature. For Windows 98 and later, APM is automatically installed. A battery and power cord icon labeled “Power Management” will appear in the “Control Panel.” Choose “Advanced” in the Power Management Properties dialog box. ASUS CUR-DLS User’s Manual...
  • Page 57 Shuts down any IDE hard disk drives in the system after a period of inac- tivity as set in this user-configurable field. This feature does not affect SCSI hard drives. Configuration options: [Disabled] [1 Min] [2 Min] [3 Min]...[15 Min] ASUS CUR-DLS User’s Manual...

  • Page 58: Power Up Control

    Con- figuration options: [Disabled] [Enabled] IMPORTANT: This feature requires an optional network interface card with Wake- On-LAN and an ATX power supply with at least 720mA +5V standby power. ASUS CUR-DLS User’s Manual...
  • Page 59 [By Date]. NOTE: Automatic Power Up will not work if the system is powered down by operating sys- tems, such as Windows 98, which have ACPI support enabled. Configura- tion options: [Disabled] [Everyday] [By Date] ASUS CUR-DLS User’s Manual...

  • Page 60: Hardware Monitor

    NOTE: If any of the monitored items is out of range, an error message will appear: “Hardware Monitor found an error. Enter Power setup menu for details”. You will then be prompted to “Press F1 to continue, DEL to enter SETUP”. ASUS CUR-DLS User’s Manual...

  • Page 61: Boot Menu

    This field allows you to select which ATAPI CD-ROM drive to use in the boot sequence. Pressing [Enter] will show the product IDs of all your con- nected ATAPI CD-ROM drives. Other Boot Device Select [INT18 Device (Network)] Configuration options: [Disabled] [SCSI Boot Device] [INT18 Device (Net- work)] ASUS CUR-DLS User’s Manual...
  • Page 62 Boot Up Floppy Seek [Disabled] When enabled, the BIOS will seek the floppy disk drive to determine whether the drive has 40 or 80 tracks. Configuration options: [Disabled] [Enabled] Full Screen Logo [Enabled] Configuration options: [Disabled] [Enabled] ASUS CUR-DLS User’s Manual...

  • Page 63: Exit Menu

    This option should only be used if you do not want to save the changes you have made to the Setup program. If you have made changes to fields other than system date, system time, and password, the system will ask for con- firmation before exiting. ASUS CUR-DLS User’s Manual...

  • Page 64: Load Setup Defaults

    This option saves your selections without exiting the Setup program. You can then return to other menus and make changes. After selecting this op- tion, all selections are saved and a confirmation is requested. Select [Yes] to save any changes to the non-volatile RAM. ASUS CUR-DLS User’s Manual...

  • Page 65: Os Driver Installation

    ® CUR-DLS Dual Socket370 Motherboard 5. OS Driver Installation...
  • Page 66 II. Intel 82559 Network Driver Installation ......... 84 A. Preparing Intel 82559 Lan Driver Diskette ......84 B. NetWare 4.XX & 5.X Installations ........84 C. NetWare 3.12 Installations ..........85 III. ATI Rage XL Display Driver Installation: ......86 ASUS CUR-DLS User’s Manual...
  • Page 67 III. ATI Rage XL Display Driver Installation: ......97 7. Linux - RedHat 6.x ..............98 I. LSI SCSI Driver Installation ............. 98 II. Intel 82559 Network Driver Installation: ........ 98 III. ATI Rage XL Display Driver Installation: ......98 ASUS CUR-DLS User’s Manual...
  • Page 68 (This page was intentionally left blank.) ASUS CUR-DLS User’s Manual...

  • Page 69: Microsoft Windows Nt Server

    Windows NT installation. (-or-) Use the self-extracting image files for Windows NT drivers. The SYM_HI.SYS executable driver is located on the ASUS Driver Support CD at: \SDMS\DISKIMAG\NT_HI The LSI_U3.SYS executable driver is located on the ASUS Driver Support CD at: \SDMS\DISKIMAG\NT_U3 B.

  • Page 70: B1. Cd-Rom Installation

    LSI driver diskette containing the Windows NT driver required to support your LSI adapter(s) and press Enter. The driver files are distributed with ASUS Driver Support CD and are created from above “Preparing a LSI Driver Diskette” Section.

  • Page 71: Existing System Installation

    LSI driver diskette containing the Windows NT driver required to support your LSI adapter(s) and press Enter. The driver files are distributed with ASUS Driver Support CD and created from the previous section “Pre- paring a LSI Driver Diskette” section.

  • Page 72: Intel 82559 Network Driver Installation

    1. Press Next when Installing Windows NT Networking screen appears. 2. Select Wired to the Network: Press Next. You can select install IIS or not. 3. Press Select from list…….. Insert the PRO/100+ adapter diskette or ASUS Driver Support CD and click Have Disk.

  • Page 73: Existing System Installation

    5. Motherboard Driver Installation 4. Type D:\LAN (for ASUS Driver Support CD) or A:\ (for floppy) in the dialog box and click OK. Then follow the prompts to complete installation. When the adapter is added you’ll see a new adapter “Intel(R) PRO Adapter” listed in the Network adapters list.

  • Page 74: Ati Rage Xl Display Driver Installation

    9. Windows NT will once again prompt for confirmation. All appropriate files are then copied to the hard disk. Select Apply in Control Panel. 10. The installed driver will become active once you restart Windows NT. ASUS CUR-DLS User’s Manual...

  • Page 75: Microsoft Windows 2000 Server

    LSI controller or processor with an optional SDMS SCSI BIOS. The next sections describe these drivers and their installation. Therefore, user only need to load the driver manually when the CUR-DLS M/B has build-in with LSI SYM53C1010 SCSI controller. As for LSI SYM53C896 SCSI controller, it’s always bundled in Windows 2000 system.

  • Page 76: Existing System Installation

    10. A list of suitable drivers appears. The entry for the upgrade driver can be veri- fied by scrolling the display to the right, and viewing the Location field. High- light the driver for the upgrade installation disk and click on the Next button. ASUS CUR-DLS User’s Manual...

  • Page 77: Intel 82559 Network Driver Installation

    The Windows 2000 system can recognize onboard Intel LAN chip as “Intel 8255x- based PCI Ethernet Adapter [10/100]”. Basically, user doesn’t need to load/change any driver for onboard LAN device. However, you can change the bundled network driver on Windows 2000 by following approach. ASUS CUR-DLS User’s Manual...

  • Page 78: Preparing Intel 82559 Lan Driver Diskette

    If you need to use a floppy disk to install the onboard Intel 82559 network adapter drivers, use the MAKEDISK.BAT utility located in the \LAN\MAKEDISK direc- tory on ASUS Driver Support CD. MAKEDISK [operating system] [destination] where [operating system] is the OS for which you are creating the diskette, and [destination] is the drive letter and path (such as A:).
  • Page 79 7. Click Next. Select the “Display a list of the known drivers for this device”. 8. Click Have Disk…. Select a location for the network driver. User can use floppy diskette or CD-ROM drive (\LAN directory from ASUS Driver Sup- port CD). Click OK.

  • Page 80: Ati Rage Xl Display Driver Installation

    5. Motherboard Driver Installation 10. Click Next. When it prompted the file “prosetp.cpl” needed (see below figure). Type D:\LAN (from ASUS Driver Support CD) or A:\ (User must copy “prosetp.cpl”file from D:\LAN in advanced) in the dialog box and click OK.

  • Page 81: Novell Netware Server

    A. Preparing a LSI Driver Diskette The SDMS™ NWPA drivers for the Novell NetWare operating system are located on the ASUS Driver Support CD at: \SDMS\DRIVERS\NetWare\ Copy all the drivers into a diskette and it will be used for the NetWare system instal- lation.

  • Page 82: Netware 4.Xx New Installations

    LSI_U3NW.HAM is loaded once for each LSI controller SCSI channel present in the system. Add the statement SLOT=<slot number> to each load line in the STARTUP.NCF, by specifying the slot numbers written down in step 5 above, with only one slot number per load instance. ASUS CUR-DLS User’s Manual...

  • Page 83: Netware 3.12 New Installation

    . Create the NetWare partition, SYS volume, and mount the SYS volume. Complete the installation of the System and Public Files. search add 1 c:\server.312\cdsave load cdrom 13. Create the Autoexec.NCF file. Add the following lines and save. load after311 load c:\server.312\nwpaload ASUS CUR-DLS User’s Manual...

  • Page 84: Intel 82559 Network Driver Installation

    If you need to use a floppy disk to install the onboard Intel 82559 network adapter drivers, use the MAKEDISK.BAT utility located in the \LAN\MAKEDISK direc- tory on ASUS Driver Support CD. MAKEDISK [operating system] [destination] where [operating system] is the OS for which you are creating the diskette, and [destination] is the drive letter and path (such as A:).

  • Page 85: Netware 3.12 Installations

    C. NetWare 3.12 Installations 1. Copy the Intel PRO/100+ server drivers (\NWSERVER\E100B.LAN) from ASUS driver support CD and any updated NLMs to a diskette. 2. Install NetWare 3.12 according to the NetWare instructions. And remember to copy the Intel PRO/100+ driver into NetWare home directory c:\server.312.

  • Page 86: Ati Rage Xl Display Driver Installation

    III. ATI Rage XL Display Driver Installation: User can select the “Super VGA” for the X Server on NetWare 5.x server system. The other NetWare system didn’t support X Server and user didn’t need the VGA driver support. ASUS CUR-DLS User’s Manual...

  • Page 87: Sun Solaris X86 Server

    SYMHISL Update diskette created above during installation of the operating sys- tem using the SYM53C896 or SYM53C1010 controller. To use the driver on the SYMHISL Driver Update diskette to install Solaris X86 (Intel Platform Edition) on a machine, follow the next steps. ASUS CUR-DLS User’s Manual...
  • Page 88 Identified Devices screen appears. 12. Press F2_Continue. The message “Loading driver...” appears followed by messages about the drivers that are required to boot your system. After a few seconds, the Boot Solaris screen appears. ASUS CUR-DLS User’s Manual...
  • Page 89 19. Press Enter. When the installation has completed, the message “Installation complete” appears. 20. Remove the diskette from the floppy diskette drive. Reboot your machine. When the Solaris operating environment is finished booting and running, the new devices whose drivers you installed are available for use. ASUS CUR-DLS User’s Manual...

  • Page 90: Existing System Installation

    # cd / # unmount /mnt 9. Remove the Solaris Driver ITU diskette from the diskette drive. 10. Reboot your machine by typing at the command prompt: # touch /reconfigure # reboot ASUS CUR-DLS User’s Manual...

  • Page 91: Intel 82559 Network Driver Installation

    User didn’t need to load the network driver for the onboard LAN device. III. ATI Rage XL Display Driver Installation Solaris 7 cannot support ATI Rage XL graphic default, user can configure the graphic as a “Standard VGA” device for supporting Solaris X Window. ASUS CUR-DLS User’s Manual...

  • Page 92: Sco Open Server 5.0.X

    Instructions for using this utility are included in its accompanying RaWrite file or as a Microsoft Word document located at: \SDMS\DRIVERS\UNIXES\RAWRITE3.DOC 2. The other DOS alternative is to use the self-extracting image file that is lo- cated at: \SDMS\DISKIMAG\OPNSERVR.EXE ASUS CUR-DLS User’s Manual...

  • Page 93: New System Installation

    To access this UNIX kernel, type after the boot prompt: [Boot : unix.safe] Press Enter. 2. Log on as system administrator “root”. 3. Insert the SDMS BTLD diskette in the floppy drive and type: [# installpkg] Press Enter to continue. ASUS CUR-DLS User’s Manual...

  • Page 94: Intel 82559 Network Driver Installation

    5.0.x, user must download the Prob100+ Network Driver from SCO FTP site at: ftp://ftp.sco.com/pub/drivers/OSR505/network/. Or user can find the Intel 82559 Network driver from ASUS Driver Support CD at: \LAN\UNIX\SCO5\ To install these drivers, take the following steps: 1. Log on as root.

  • Page 95: Sco Unixware Server

    Instructions for using this utility are included in its accompanying RaWrite file or as a Microsoft Word document located at: \SDMS\DRIVERS\UNIXES\RAWRITE3.DOC 2. The other DOS alternative is to use the self-extracting image file appropriate for your version of UnixWare. These are located under: \SDMS\DISKIMAG\UW21X.EXE (-or-) \SDMS\DISKIMAG\UW7.EXE ASUS CUR-DLS User’s Manual...

  • Page 96: New System Installation

    If the kernel panics during boot, then reboot the system with the saved copy of the old kernel. Booting from the saved copy of the kernel is described in the following section titled “Troubleshooting.” If the reboot is successful, the system is ready to use. ASUS CUR-DLS User’s Manual...

  • Page 97: Intel 82559 Network Driver Installation

    Prob 100+ Network Driver from SCO FTP site at: ftp://ftp.sco.com/pub/ drivers/UW710/network/ Or user can find the Intel 82559 Network driver from ASUS Driver Support CD at: \LAN\UNIX\UWx\ It is not necessary, nor recommended, to remove previous versions of this package from the system before installing this updated version.

  • Page 98: Linux - Redhat 6.X

    However, as for the SYM53C1010 controller, user must need to rebuild a new OS kernel for support the SYM53C1010 controller. For detailed pro- cedure, please check the README file from ASUS support CD as below, or wait- ing for the new released Linux RedHat kernel.

  • Page 99: Software Reference

    ® CUR-DLS Dual Socket370 Motherboard 6. Software Reference (The software package for this motherboard was not complete during the production of this manual. Check ASUS’ Web site for manual updates.)
  • Page 100 (This page was intentionally left blank.) ASUS CUR-DLS User’s Manual...

  • Page 101: Appendix

    BIOS file into the EEPROM. Bit (Binary Digit) Represents the smallest unit of data used by the computer. A bit can have one of two values: 0 or 1. ASUS CUR-DLS User’s Manual...
  • Page 102 IDE devices integrate the drive control circuitry directly on the drive itself, elimi- nating the need for a separate adapter card (in the case for SCSI devices). UltraDMA/ 33 IDE devices can achieve up to 33MB/Sec transfer. ASUS CUR-DLS User’s Manual...
  • Page 103 Developed by Rambus, Inc., this type of memory can deliver up to 1.6GB of data per second. RDRAM is the first interface standard that can be directly implemented on high performance VLSI components such as, CMOS DRAMs, memory control- lers, and graphics/video ICs. ASUS CUR-DLS User’s Manual...
  • Page 104 USB 2.0 provides twice the transfer rate compared to USB 1.0 and competes with the 1394 standard. Wake-On-LAN Computer will automatically wake-up upon receiving a wake-up packet through a Network interface when it is under power soft-off, suspend or sleep mode. ASUS CUR-DLS User’s Manual...
  • Page 105 • 366MHz to 650MHz+ • 64MB to 192MB Memory • Supports Two Hard Drives L7300/7200 Series All-in-One Compact Notebook PC • 13.3” or 12.1” TFT Color Display • 366MHz to 650MHz+ • 64MB to 192MB Memory Visit www.asus.com for updated specifications...
  • Page 106 2 Ultra3 New! Three 1.6-inch or five 1-inch SCA-2 SCSI hard drives Eight 1.6-inch or 1-inch SCSI hard drives Mid-Range Servers AP6000 AP8000 Value Servers AP6300 AP2000 Group Servers AP3000 AP100 AP2300 AP200 Rack Mountable Visit www.asus.com for updated specifications...
  • Page 107 • Aluminum disk arrays for easy heat dissipation • 350W redundant power supply ASUS PCI-DA2200 Series SCSI RAID Card • PCI-DA2200 series support 5x86-133 processor • One 72-pin SIMM socket supports up to 128MB cache memory • RAID levels 0, 0+1, 3, 5, non-RAID •...
  • Page 108 • Supports Multi-Read function ® Ultra-Fast CD-ROM • Supports high speed CD-Audio playback • Supports high speed digital audio extraction • Supports UltraDMA/33 transfer mode • Compatible with all CD formats • Supports multi-read function (CD-R/CD-RW) Visit www.asus.com for updated specifications...
  • Page 110 Visit www.asus.com for updated specifications...

Table of Contents