1. Manuals
  2. Brands
  3. Asus Manuals
  4. Motherboard
  5. CUR-DLSR
  6. User manual

Asus CUR-DLSR User Manual

Dual socket 370 motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
CUR-DLSR
Dual Socket 370 Motherboard
USER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Asus CUR-DLSR

Summary of Contents for Asus CUR-DLSR

  • Page 1 ® CUR-DLSR Dual Socket 370 Motherboard USER’S MANUAL...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or al- tered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Asus Contact Information

    ASUS COMPUTER GmbH (Europe) Marketing Address: Harkortstr. 25, 40880 Ratingen, BRD, Germany Fax: +49-2102-442066 Email: sales@asuscom.de (for marketing requests only) Technical Support Hotline: MB/Others: +49-2102-9599-0 Notebook: +49-2102-9599-10 Fax: +49-2102-9599-11 Support (Email): www.asuscom.de/de/support (for online support) WWW: www.asuscom.de FTP: ftp.asuscom.de/pub/ASUSCOM ASUS CUR-DLSR User’s Manual...

  • Page 4: Table Of Contents

    1. INTRODUCTION ................7 1.1 How This Manual Is Organized ........... 7 1.2 Item Checklist ................7 2. FEATURES ..................8 2.1 ASUS CUR-DLSR Motherboard ..........8 2.1.1 Specifications ..............8 2.1.2 Performance ..............10 2.1.3 Intelligence ............... 11 2.2 CUR-DLSR Motherboard Components ........12 2.2.1 Component Locations ............
  • Page 5 4.5.1 Power Up Control ............. 63 4.5.2 Hardware Monitor ............65 4.6 Boot Menu ................. 66 4.7 Exit Menu ................... 68 5. OS DRIVER INSTALLATION ............71 (Turn to page 71 for detailed contents on OS Drivers) ASUS CUR-DLSR User’s Manual...

  • Page 6: Federal Communications Commission Statement

    Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. ASUS CUR-DLSR User’s Manual...

  • Page 7: Introduction

    (1) 68-pin LVD SCSI ribbon cable for Ultra160 devices with Terminator (1) Ribbon cable for a 3.5” floppy disk drive (1) Support drivers and utilities (1) User’s Manual Optional Items (1) PGA370 CPU Terminator (required when installing only one CPU) ASUS CUR-DLSR User’s Manual...

  • Page 8: Features

    2. FEATURES 2.1 ASUS CUR-DLSR Motherboard The ASUS CUR-DLSR motherboard is designed primarily for multi-server environments to optimize available space without sacrificing performance. Powered ® ® by dual Intel Pentium III processors, the CUR-DLSR efficiently complies with today’s demand for a high-integration server.
  • Page 9 • Server Health Monitoring: Provides an easy way to examine and manage system status information, such as CPU and systerm voltages, temperatures, and fan status through the onboard hardware ASUS ASIC. • Enhanced ACPI: Programmable BIOS (Flash EEPROM), offering enhanced ACPI for Windows 2000 compatibility, and autodetection of most devices for virtually automatic setup.

  • Page 10: Performance

    • ACPI Ready: ACPI (Advanced Configuration and Power Interface) is also implemented on all ASUS smart series motherboards. ACPI provides more Energy Saving Features for future operating systems (OS) supporting OS Direct Power Management (OSPM) functionality. With these features implemented in the OS, PCs can be ready around the clock, yet satisfy all the energy saving standards.

  • Page 11: Intelligence

    Remote management response via remote diagnostics and troubleshooting work even when the operating system has frozen. Remote power down for power management. Asset tracking and monitoring through features like presence ping and logoff notification. ASUS CUR-DLSR User’s Manual...

  • Page 12: Cur-Dlsr Motherboard Components

    Wake-On-LAN Connector ....(see layout on next page) Wake-On-Ring Connector ....(see layout on next page) Hardware Monitoring System Voltage Monitoring (integrated in ASUS ASIC) ..1 (4) Fan Power & Speed Monitoring Connectors (see layout on next page) Power ATX Power Supply Connector ..........4 CMOS Battery Lithium CR2032 3V ...............

  • Page 13: Component Locations

    2. FEATURES 2.2.1 Component Locations 15 14 13 ASUS CUR-DLSR User’s Manual...

  • Page 14: Hardware Setup

    3. HARDWARE SETUP 3.1 CUR-DLSR Motherboard Layout ATX_POWER PS/2 T: Mouse B: Keyboard CPU_FAN2 USB1 USB2 COM2 COM1 Socket 370 ServerWorks RJ-45 CPU_FAN1 Socket 370 RCC-NB6635 North Bridge RJ-45 Intel JP2 JP3 Fast Ethernet CHASSIS Intel Fast CONFIG 1 2 3 4 5 6 7 8...

  • Page 15: Layout Contents

    34 Chassis Open Alarm Lead (4-pin) 16) SMB p. 35 SMBus Connector (5-1 pins) 17) ASMCSA/ASMCSB p. 35 ASUS Ser Management Card Connectors 18) COM2 p. 36 Serial Port 2 (9-pin male) 19) PANEL2 p. 36 Panel 2 Connector (8-pin) 20) ATXPWR p.

  • Page 16: Hardware Setup Procedure

    5. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. ASUS CUR-DLSR User’s Manual...
  • Page 17 1 2 3 4 5 6 7 8 CUR-DLSR CUR-DLSR Configuration DIP Switches The following illustrations show the all DIP switches on the CUR-DLSR motherboard and their corresponding settings. 1) CPU Core Bus Frequency Multiple (Switches 5-8) This option sets the frequency multiple between the CPU’s internal and external frequencies.
  • Page 18 To erase the RTC RAM: (1) Unplug your computer, (2) Short the solder points, (3) Turn ON your computer, (4) Hold down the <Del> key during bootup and enter BIOS setup to re-enter user preferences. R266 CLRTC Short solder points CUR-DLSR to Clear CMOS CUR-DLSR Clear RTC RAM ASUS CUR-DLSR User’s Manual...

  • Page 19: System Memory

    SDRAM 64MB, 128MB, 256MB, 512MB, 1GB x1 Total System Memory (Max. 4GB) IMPORTANT: The system chipset only supports 64Mbit, 128Mbit, and 256Mbit “registered” SDRAMs with ECC. Make sure to use the specified DIMM types for smooth system operation. ASUS CUR-DLSR User’s Manual...

  • Page 20: Memory Installation

    20 Pins CUR-DLSR Lock CUR-DLSR 168-Pin DIMM Sockets Use only 3.3Volt “registered” SDRAM DIMMs. To determine the DIMM type, check the notches on the DIMMs (see the figure below). The notches on the DIMM shifts between left, center, or right to identify the type and also to prevent the wrong type from being inserted into the DIMM slot on the motherboard.

  • Page 21: Central Processing Unit (Cpu)

    CPU to overheat and may damage both the CPU and the motherboard. Proceed to the next section for the steps on how to properly install the CPU and the specially designed heatsink for the 1U system. ASUS CUR-DLSR User’s Manual...

  • Page 22: Installing The Cpu And Terminator

    CPU. The figure on the right shows an installed CPU terminator. NOTE: Do not forget to set the correct Bus Frequency and Multiple (frequency multiple setting is available only on unlocked processors) for the processor to avoid start-up problems. ASUS CUR-DLSR User’s Manual...

  • Page 23: Heatsink Installation

    CPU socket. Retaining Clip for the Tab at the Back of the Socket 3. Check and make sure that the retaining clip is properly in place. ASUS CUR-DLSR User’s Manual...

  • Page 24: Expansion Cards

    9. If you installed a long expansion card, pull down the metal card guide and fit it to the other end of the card to hold the card in place. 10. Install the necessary software drivers for your expansion card. Expansion Card Locking Tab Riser Card PCI Slot ASUS CUR-DLSR User’s Manual...

  • Page 25: Assigning Irqs For Expansion Cards

    ISA 11* IRQ Holder for PCI Steering ISA 12* PS/2 Compatible Mouse Port ISA 13 Numeric Data Processor ISA 14* Primary IDE Channel ISA 15* Secondary IDE Channel *These IRQs are usually available for PCI devices. ASUS CUR-DLSR User’s Manual...
  • Page 26 64-bit PCI Slot PCI 00 PCI 13 PCI 14 PCI 15 IRQ Assignments for Other Onboard Devices Device Assignment ATI Video PCI10 Intel 82559 #1 PCI6 Intel 82559 #2 PCI7 LSI 1010-33 CHA PCI8 LSI 1010-33 CHB PCI9 ASUS CUR-DLSR User’s Manual...

  • Page 27: Connectors

    DIN to mini DIN adapter on standard AT keyboards. PS/2 Keyboard (6-pin female) 3) Universal Serial BUS Ports 1 & 2 (Black two 4-pin USB) Two USB ports are available for connecting USB devices. USB 1 Universal Serial Bus (USB) 2 ASUS CUR-DLSR User’s Manual...
  • Page 28 This connector is for a VGA monitor and other VGA-compatible devices. VGA Monitor (15-pin female) 7) Fast Ethernet LAN Connector (R-J45) The RJ-45 connector allows connection to a Local Area Network (LAN) through a network hub. RJ-45 Port ASUS CUR-DLSR User’s Manual...

  • Page 29: Internal Connectors

    (Pin 5 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 5 plugged). PIN 1 CUR-DLSR NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. CUR-DLSR Floppy Disk Drive Connector ASUS CUR-DLSR User’s Manual...
  • Page 30 – one for the primary IDE connector and another for the secondary IDE connector. PIN 1 IDE2 PIN 1 CUR-DLSR NOTE: Orient the red markings CUR-DLSR IDE Connectors (usually zigzag) on the IDE ribbon cable to PIN 1. ASUS CUR-DLSR User’s Manual...
  • Page 31 3) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. APPENDIX). The connector powers up the system when a wakeup packet or signal is received through the LAN card.
  • Page 32 LED” in the panel connectors IDELED CUR-DLSR CUR-DLSR IDE Activity LED 6) Two 68-pin Ultra160 SCSI Connectors (SCSI-A, SCSI-B) This motherboard has two 68-Pin Ultra160 SCSI connectors; one for each of the two channels. Each channel can support a maximum of 15 devices as specified by Ultra160 standards.

  • Page 33: Scsi Connection Notes

    Terminator CUR-DLSR Internal SCSI Devices (up to 15 devices) CUR-DLSR SCSI Connection Example NOTE: Ultra160 SCSI devices do not have termination jumpers and must use a separate terminator on the last connector (internal) or device (external). ASUS CUR-DLSR User’s Manual...
  • Page 34 +12V CHA_FAN1 / CHA_FAN2 CUR-DLSR CUR-DLSR 12-Volt Cooling Fan Power 8) Chassis Open Alarm Lead Connector (CHASSIS) This connector is designed for chassis intrusion detection. When any chassis component is removed, the contact should open and the motherboard will record a chassis intrusion event.
  • Page 35 CUR-DLSR CUR-DLSR SMBus Power Connector 10) ASMC Connectors (Reserved) This motherboard has two ASMC connectors that can support the ASUS Server Management Card (ASMC). The ASMC is a future option. CUR-DLSR CUR-DLSR ASMC Connectors...
  • Page 36 See the BIOS section 4.4.2 I/O Device Configuration to configure Serial Port 2 settings. PIN 1 CUR-DLSR CUR-DLSR Serial COM2 Connector 12) Panel 2 Connector This connector supports some of the functions in the 20-pin PANEL connector, such as the power button, IDE LED, and power LED.
  • Page 37 +5-volt standby lead (+5VSB). You may experience difficulty in turning ON your system if your power supply cannot support the load. CUR-DLSR CUR-DLSR ATX Power Connector 14) Power Button Connector (PWRBTN) This connector allows you to turn the system ON or OFF. The power LED lights up when the system is turned ON.
  • Page 38 This shows the status of the NIC through a panel-mounted LED. 16) Status LED (2-pin) This shows the system status as programmed through the ASUS ASIC. 17) System Management Interrupt Lead (2-pin) This allows the user to manually place the system into a suspend mode or “Green”...

  • Page 39: Starting Up The First Time

    No DRAM installed or detected One long beep followed by Video card not found or video card three short beeps memory bad High frequency beeps when CPU overheated system is working System running at a lower frequency ASUS CUR-DLSR User’s Manual...
  • Page 40 Windows 9X, click the Start button, click Shut Down, and then click Shut down the computer? The power supply should turn off after Windows shuts down. NOTE: The message “You can now safely turn off your computer” does not appear when shutting down with ATX power supplies. ASUS CUR-DLSR User’s Manual...

  • Page 41: Bios Setup

    4. In DOS mode, type A:\AFLASH <Enter> to run AFLASH. IMPORTANT! If the word “unknown” appears after Flash Memory:, the memory chip is either not programmable or is not supported by the ACPI BIOS and therefore, cannot be programmed by the Flash Memory Writer utility. ASUS CUR-DLSR User’s Manual...

  • Page 42: Bios Setup

    5. Select 1. Save Current BIOS to File from the Main menu and press <Enter>. The Save Current BIOS To File screen appears. 6. Type a filename and the path, for example, A:\XXX-XX.XXX and then press <Enter>. ASUS CUR-DLSR User’s Manual...

  • Page 43: Updating Bios Procedures

    BIOS revision will solve your problems. Careless updating can result to more problems with the motherboard! 1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) (see ASUS CONTACT INFORMATION on page 3 for details) and save to the boot floppy disk you created earlier.
  • Page 44 BIOS file you saved to the boot disk. If the Flash Memory Writer utility is not able to successfully update a complete BIOS file, the system may not boot. If this happens, call the ASUS service center for support.

  • Page 45: Bios Setup Program

    POST. NOTE: Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purposes only, and may not exactly match what you see on your screen. ASUS CUR-DLSR User’s Manual...

  • Page 46: Bios Menu Bar

    Brings up a selection menu for the highlighted field <Home> or <PgUp> Moves the cursor to the first field <End> or <PgDn> Moves the cursor to the last field <F5> Resets the current screen to its Setup Defaults <F10> Saves changes and exits Setup ASUS CUR-DLSR User’s Manual...

  • Page 47: General Help

    Item Specific Help window located to the right of each menu. This window displays the help text for the currently highlighted field. NOTE: The item heading in square brackets represents the default setting for that field. ASUS CUR-DLSR User’s Manual...

  • Page 48: Main Menu

    Legacy Diskette A [1.44M, 3.5 in.], Legacy Diskette B [None] Sets the type of floppy drives installed. Configuration options: [None] [360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.] ASUS CUR-DLSR User’s Manual...

  • Page 49: Primary & Secondary Master/Slave

    Primary IDE hard disk drives must have its partition set to active (also possible with FDISK). Other options for the Type field are: [None] - to disable IDE devices ASUS CUR-DLSR User’s Manual...
  • Page 50 NOTE: To make changes to this field, the Type field must be set to [User Type HDD] and the Translation Method field must be set to [Manual]. ASUS CUR-DLSR User’s Manual...
  • Page 51 IDE devices. Set to [Disabled] to suppress Ultra DMA capability. NOTE: To make changes to this field, the Type field must be set to [User Type HDD]. Configuration options vary according to your device. ASUS CUR-DLSR User’s Manual...

  • Page 52: Keyboard Features

    [6/Sec] [8/Sec] [10/Sec] [12/Sec] [15/Sec] [20/Sec] [24/Sec] [30/Sec] Keyboard Auto-Repeat Delay [1/4 Sec] This field sets the time interval for displaying the first and second characters. Configuration options: [1/4 Sec] [1/2 Sec] [3/4 Sec] [1 Sec] ASUS CUR-DLSR User’s Manual...
  • Page 53 Configuration options: [All Errors] [No Error] [All but Keyboard] [All but Disk] [All but Disk/Keyboard] Installed Memory [XXX MB] This display-only field displays the amount of conventional memory detected by the system during bootup. You do not need to make changes to this field. ASUS CUR-DLSR User’s Manual...

  • Page 54: Advanced Menu

    This functions as an update loader integrated into the BIOS to supply the processor with the required data. In the default position of [Enabled], the BIOS will load the update on all processors during system bootup. Configu- ration options: [Disabled] [Enabled] ASUS CUR-DLSR User’s Manual...
  • Page 55 Configuration options: [Enabled] [Auto] OS/2 Onboard Memory > 64M [Disabled] When using OS/2 operating systems with installed DRAM of greater than 64MB, you need to set this option to [Enabled]; otherwise, leave this on [Disabled]. Configuration options: [Disabled] [Enabled] ASUS CUR-DLSR User’s Manual...

  • Page 56: Chip Configuration

    Configuration options: [UC] [USWC] Onboard PCI IDE Enable [Both] You can select to enable the primary IDE channel, both the primary and secondary channels, or disable both channels. Configuration options: [Both] [Primary] [Disabled] ASUS CUR-DLSR User’s Manual...

  • Page 57: I/O Device Configuration

    [EPP] allows bidirectional parallel port operation; [ECP] allows the parallel port to operate in bidirectional DMA mode; [ECP+EPP] allows normal speed operation in a two-way mode. Configuration options: [Normal] [EPP] [ECP] [ECP+EPP] ASUS CUR-DLSR User’s Manual...

  • Page 58: Pci Configuration

    [Disabled] will disable the motherboard’s Symbios SCSI BIOS so that the BIOS on an add-on Symbios SCSI card can be used. If your Symbios SCSI card does not have a BIOS, the Symbios SCSI card will not function. Configuration options: [Auto] [Disabled] ASUS CUR-DLSR User’s Manual...
  • Page 59 VGA controllers. Configuration options: [No] [Yes] Onboard LAN Boot ROM [Disabled] When set to [Enabled], this field allows your computer to boot from the network using the onboard LAN controller boot ROM. Configuration options: [Disabled] [Enabled] ASUS CUR-DLSR User’s Manual...

  • Page 60: Shadow Configuration

    ROMs on them, you will need to know which addresses the ROMs use to shadow them specifically. Shadowing a ROM reduces the memory available between 640K and 1024K by the amount used for this purpose. Configuration options: [Disabled] [Enabled] ASUS CUR-DLSR User’s Manual...

  • Page 61: Power Menu

    Windows 3.x and Windows 95, you need to install Windows with the APM feature. For Windows 98 and later, APM is automatically installed. A battery and power cord icon labeled “Power Management” will appear in the “Control Panel.” Choose “Advanced” in the Power Management Properties dialog box. ASUS CUR-DLSR User’s Manual...
  • Page 62 SCSI hard drives. Configuration options: [Disabled] [1 Min] [2 Min] [3 Min]...[15 Min] Suspend Mode [Disabled] This sets the time period before the system goes into suspend mode. Configuration options: [Disabled] [1~2 Min] [2~3 Min]...[1 Hour] ASUS CUR-DLSR User’s Manual...

  • Page 63: Power Up Control

    Configuration options: [Disabled] [Enabled] IMPORTANT: This feature requires an optional network interface card with Wake- On-LAN and an ATX power supply with at least 720mA +5V standby power. ASUS CUR-DLSR User’s Manual...
  • Page 64 [By Date]. NOTE: Automatic Power Up will not work if the system is powered down by operating systems, such as Windows 98, which have ACPI support enabled. Configuration options: [Disabled] [Everyday] [By Date] ASUS CUR-DLSR User’s Manual...

  • Page 65: Hardware Monitor

    NOTE: If any of the monitored items is out of range, an error message will appear: “Hardware Monitor found an error. Enter Power setup menu for details”. You will then be prompted to “Press F1 to continue, DEL to enter SETUP”. ASUS CUR-DLSR User’s Manual...

  • Page 66: Boot Menu

    Pressing [Enter] will show the product IDs of all connected IDE hard disk drives. ATAPI CD-ROM This field allows you to select which ATAPI CD-ROM drive to use in the boot sequence. Pressing [Enter] will show the product IDs of all your connected ATAPI CD-ROM drives. ASUS CUR-DLSR User’s Manual...
  • Page 67 This field speeds up the Power-On-Self Test (POST) routine by skipping retesting a second, third, and fourth time. Configuration options: [Disabled] [Enabled] Boot Up Floppy Seek [Enabled] When enabled, the BIOS seeks the floppy disk drive once during bootup. Configuration options: [Disabled] [Enabled] ASUS CUR-DLSR User’s Manual...

  • Page 68: Exit Menu

    This option should only be used if you do not want to save the changes you have made to the Setup program. If you have made changes to fields other than system date, system time, and password, the system will ask for confirmation before exiting. ASUS CUR-DLSR User’s Manual...

  • Page 69: Load Setup Defaults

    This option saves your selections without exiting the Setup program. You can then return to other menus and make changes. After selecting this option, all selections are saved and a confirmation is requested. Select [Yes] to save any changes to the non-volatile RAM. ASUS CUR-DLSR User’s Manual...
  • Page 70 4. BIOS SETUP (This page was intentionally left blank.) ASUS CUR-DLSR User’s Manual...

  • Page 71: Os Driver Installation

    ® CUR-DLSR Dual Socket370 Motherboard 5. OS Driver Installation...
  • Page 72 II. Intel 82559 Network Driver Installation ......... 90 A. Preparing Intel 82559 Lan Driver Diskette ......90 B. NetWare 4.XX & 5.X Installations ........90 C. NetWare 3.12 Installations ..........91 III. ATI Rage XL Display Driver Installation: ......92 ASUS CUR-DLSR User’s Manual...
  • Page 73 III. ATI Rage XL Display Driver Installation: ......103 7. Linux - RedHat 6.x ..............104 I. LSI SCSI Driver Installation ........... 104 II. Intel 82559 Network Driver Installation: ......104 III. ATI Rage XL Display Driver Installation: ......104 ASUS CUR-DLSR User’s Manual...
  • Page 74 (This page was intentionally left blank.) ASUS CUR-DLSR User’s Manual...

  • Page 75: Microsoft Windows Nt Server

    Windows NT installation. (-or-) Use the self-extracting image files for Windows NT drivers. The SYM_HI.SYS executable driver is located on the ASUS Driver Support CD at: \SDMS\DISKIMAG\NT_HI The LSI_U3.SYS executable driver is located on the ASUS Driver Support CD at: \SDMS\DISKIMAG\NT_U3 B.

  • Page 76: B1. Cd-Rom Installation

    LSI driver diskette containing the Windows NT driver required to support your LSI adapter(s) and press Enter. The driver files are distributed with ASUS Driver Support CD and are created from above “Preparing a LSI Driver Diskette” Section.

  • Page 77: Existing System Installation

    LSI driver diskette containing the Windows NT driver required to support your LSI adapter(s) and press Enter. The driver files are distributed with ASUS Driver Support CD and created from the previous section “Pre- paring a LSI Driver Diskette” section.

  • Page 78: Intel 82559 Network Driver Installation

    1. Press Next when Installing Windows NT Networking screen appears. 2. Select Wired to the Network: Press Next. You can select install IIS or not. 3. Press Select from list…….. Insert the PRO/100+ adapter diskette or ASUS Driver Support CD and click Have Disk.

  • Page 79: Existing System Installation

    5. Motherboard Driver Installation 4. Type D:\LAN (for ASUS Driver Support CD) or A:\ (for floppy) in the dialog box and click OK. Then follow the prompts to complete installation. When the adapter is added you’ll see a new adapter “Intel(R) PRO Adapter” listed in the Network adapters list.

  • Page 80: Ati Rage Xl Display Driver Installation

    9. Windows NT will once again prompt for confirmation. All appropriate files are then copied to the hard disk. Select Apply in Control Panel. 10. The installed driver will become active once you restart Windows NT. ASUS CUR-DLSR User’s Manual...

  • Page 81: Microsoft Windows 2000 Server

    LSI SYM53C1010 SCSI controller. As for LSI SYM53C896 SCSI controller, it’s always bundled in Windows 2000 system. A. Preparing a LSI Driver Diskette The drivers are located on the ASUS Driver Support CD at: \SDMS\DRIVERS\WIN2K\XXX2K\I386\WINNT\MINIPORT where XXX2K represents the specific Windows NT subdirectory. For example, the LSI_U3.SYS driver is located in the Ultra32K subdirectory.

  • Page 82: Existing System Installation

    10. A list of suitable drivers appears. The entry for the upgrade driver can be veri- fied by scrolling the display to the right, and viewing the Location field. High- light the driver for the upgrade installation disk and click on the Next button. ASUS CUR-DLSR User’s Manual...

  • Page 83: Intel 82559 Network Driver Installation

    The Windows 2000 system can recognize onboard Intel LAN chip as “Intel 8255x- based PCI Ethernet Adapter [10/100]”. Basically, user doesn’t need to load/change any driver for onboard LAN device. However, you can change the bundled network driver on Windows 2000 by following approach. ASUS CUR-DLSR User’s Manual...

  • Page 84: Preparing Intel 82559 Lan Driver Diskette

    If you need to use a floppy disk to install the onboard Intel 82559 network adapter drivers, use the MAKEDISK.BAT utility located in the \LAN\MAKEDISK direc- tory on ASUS Driver Support CD. MAKEDISK [operating system] [destination] where [operating system] is the OS for which you are creating the diskette, and [destination] is the drive letter and path (such as A:).
  • Page 85 7. Click Next. Select the “Display a list of the known drivers for this device”. 8. Click Have Disk…. Select a location for the network driver. User can use floppy diskette or CD-ROM drive (\LAN directory from ASUS Driver Sup- port CD). Click OK.

  • Page 86: Ati Rage Xl Display Driver Installation

    5. Motherboard Driver Installation 10. Click Next. When it prompted the file “prosetp.cpl” needed (see below figure). Type D:\LAN (from ASUS Driver Support CD) or A:\ (User must copy “prosetp.cpl”file from D:\LAN in advanced) in the dialog box and click OK.

  • Page 87: Novell Netware Server

    A. Preparing a LSI Driver Diskette The SDMS™ NWPA drivers for the Novell NetWare operating system are located on the ASUS Driver Support CD at: \SDMS\DRIVERS\NetWare\ Copy all the drivers into a diskette and it will be used for the NetWare system instal- lation.

  • Page 88: Netware 4.Xx New Installations

    LSI_U3NW.HAM is loaded once for each LSI controller SCSI channel present in the system. Add the statement SLOT=<slot number> to each load line in the STARTUP.NCF, by specifying the slot numbers written down in step 5 above, with only one slot number per load instance. ASUS CUR-DLSR User’s Manual...

  • Page 89: Netware 3.12 New Installation

    . Create the NetWare partition, SYS volume, and mount the SYS volume. Complete the installation of the System and Public Files. search add 1 c:\server.312\cdsave load cdrom 13. Create the Autoexec.NCF file. Add the following lines and save. load after311 load c:\server.312\nwpaload ASUS CUR-DLSR User’s Manual...

  • Page 90: Intel 82559 Network Driver Installation

    If you need to use a floppy disk to install the onboard Intel 82559 network adapter drivers, use the MAKEDISK.BAT utility located in the \LAN\MAKEDISK direc- tory on ASUS Driver Support CD. MAKEDISK [operating system] [destination] where [operating system] is the OS for which you are creating the diskette, and [destination] is the drive letter and path (such as A:).

  • Page 91: Netware 3.12 Installations

    C. NetWare 3.12 Installations 1. Copy the Intel PRO/100+ server drivers (\NWSERVER\E100B.LAN) from ASUS driver support CD and any updated NLMs to a diskette. 2. Install NetWare 3.12 according to the NetWare instructions. And remember to copy the Intel PRO/100+ driver into NetWare home directory c:\server.312.

  • Page 92: Ati Rage Xl Display Driver Installation

    III. ATI Rage XL Display Driver Installation: User can select the “Super VGA” for the X Server on NetWare 5.x server system. The other NetWare system didn’t support X Server and user didn’t need the VGA driver support. ASUS CUR-DLSR User’s Manual...

  • Page 93: Sun Solaris X86 Server

    SYMHISL Update diskette created above during installation of the operating sys- tem using the SYM53C896 or SYM53C1010 controller. To use the driver on the SYMHISL Driver Update diskette to install Solaris X86 (Intel Platform Edition) on a machine, follow the next steps. ASUS CUR-DLSR User’s Manual...
  • Page 94 Identified Devices screen appears. 12. Press F2_Continue. The message “Loading driver...” appears followed by messages about the drivers that are required to boot your system. After a few seconds, the Boot Solaris screen appears. ASUS CUR-DLSR User’s Manual...
  • Page 95 19. Press Enter. When the installation has completed, the message “Installation complete” appears. 20. Remove the diskette from the floppy diskette drive. Reboot your machine. When the Solaris operating environment is finished booting and running, the new devices whose drivers you installed are available for use. ASUS CUR-DLSR User’s Manual...

  • Page 96: Existing System Installation

    # cd / # unmount /mnt 9. Remove the Solaris Driver ITU diskette from the diskette drive. 10. Reboot your machine by typing at the command prompt: # touch /reconfigure # reboot ASUS CUR-DLSR User’s Manual...

  • Page 97: Intel 82559 Network Driver Installation

    User didn’t need to load the network driver for the onboard LAN device. III. ATI Rage XL Display Driver Installation Solaris 7 cannot support ATI Rage XL graphic default, user can configure the graphic as a “Standard VGA” device for supporting Solaris X Window. ASUS CUR-DLSR User’s Manual...

  • Page 98: Sco Open Server 5.0.X

    Instructions for using this utility are included in its accompanying RaWrite file or as a Microsoft Word document located at: \SDMS\DRIVERS\UNIXES\RAWRITE3.DOC 2. The other DOS alternative is to use the self-extracting image file that is lo- cated at: \SDMS\DISKIMAG\OPNSERVR.EXE ASUS CUR-DLSR User’s Manual...

  • Page 99: New System Installation

    To access this UNIX kernel, type after the boot prompt: [Boot : unix.safe] Press Enter. 2. Log on as system administrator “root”. 3. Insert the SDMS BTLD diskette in the floppy drive and type: [# installpkg] Press Enter to continue. ASUS CUR-DLSR User’s Manual...

  • Page 100: Intel 82559 Network Driver Installation

    5.0.x, user must download the Prob100+ Network Driver from SCO FTP site at: ftp://ftp.sco.com/pub/drivers/OSR505/network/. Or user can find the Intel 82559 Network driver from ASUS Driver Support CD at: \LAN\UNIX\SCO5\ To install these drivers, take the following steps: 1. Log on as root.

  • Page 101: Sco Unixware Server

    Instructions for using this utility are included in its accompanying RaWrite file or as a Microsoft Word document located at: \SDMS\DRIVERS\UNIXES\RAWRITE3.DOC 2. The other DOS alternative is to use the self-extracting image file appropriate for your version of UnixWare. These are located under: \SDMS\DISKIMAG\UW21X.EXE (-or-) \SDMS\DISKIMAG\UW7.EXE ASUS CUR-DLSR User’s Manual...

  • Page 102: New System Installation

    If the kernel panics during boot, then reboot the system with the saved copy of the old kernel. Booting from the saved copy of the kernel is described in the following section titled “Troubleshooting.” If the reboot is successful, the system is ready to use. ASUS CUR-DLSR User’s Manual...

  • Page 103: Intel 82559 Network Driver Installation

    Prob 100+ Network Driver from SCO FTP site at: ftp://ftp.sco.com/pub/ drivers/UW710/network/ Or user can find the Intel 82559 Network driver from ASUS Driver Support CD at: \LAN\UNIX\UWx\ It is not necessary, nor recommended, to remove previous versions of this package from the system before installing this updated version.

  • Page 104: Linux - Redhat 6.X

    However, as for the SYM53C1010 controller, user must need to rebuild a new OS kernel for support the SYM53C1010 controller. For detailed pro- cedure, please check the README file from ASUS support CD as below, or wait- ing for the new released Linux RedHat kernel.

Table of Contents