Advanced Cd Or Mp3/Wma Disc Playback; Numeric Buttons; Repeat Button - Sharp XL-HF201P User Manual

Listening to a CD or MP3/WMA disc
(continued)
5
Press the OPEN/CLOSE button to close the disc tray.
6
Press the / (CD/USB
the last track is played, the unit will stop automatically.
Caution:
● Do not place two discs in one disc tray.
● Do not play discs of special shapes (heart, octagon, etc). It
may cause malfunctions.
● Do not push the disc tray whilst it is moving.
● If the power fails whilst the tray is open, wait until the power
is restored.
● If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.
● Be sure to place 8 cm (3") disc in the middle of the disc tray.
● Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
Notes for CD or MP3/WMA disc:
● When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached
during fast reverse, the unit will enter the playback mode (only
for CD).
● Rewritable multi-session discs with unfinished writing, can
still be played.
■ Various disc functions
Function Main Remote
unit control
Play
Stop
Pause
Track
up/
down
Fast
forward/
reverse
/ ) button to start playback. After
Operation
Press in the stop mode.
Press in the playback
mode.
Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
Press in the playback or
stop mode.
If you press the button in
the stop mode, press the
/ button to start the
desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
Advanced CD or MP3/WMA disc
playback
■ Direct track search
By using the Numeric buttons, the desired tracks on the
current disc can be played.
Use the Numeric buttons on the remote control to select
the desired track whilst playing the selected disc.
● The Numeric buttons allow you to select up to number 9.
● When selecting number 10 or higher, use the "10+" button.
A. For example, to choose 13
1
Press the "10+" button once.
2
Press the "1" button.
3
Press the "3" button.
B. For example, to choose 130
1
Press the "10+" button twice.
2
Press the "1" button.
3
Press the "3" button.
4
Press the "0" button.
Notes:
● A track number higher than the number of tracks on the
disc cannot be selected.
● During random play, direct search is not possible.
To stop playback:
Press the (CD/USB
■ Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the REPEAT button repeatedly until "Repeat One"
appears. Press the
To repeat all tracks:
Press the REPEAT button repeatedly until "Repeat All"
appears. Press the
To repeat desired tracks:
Perform steps 1 - 5 in "Programmed play" section on page 11
and then press the REPEAT button repeatedly until "Repeat
All" appears.
To cancel repeat play:
Press the REPEAT button repeatedly until "Normal" appears
and " " disappears.
Caution:
After performing repeat play, be sure to press the
USB ) button. Otherwise, the disc will play continuously.
E-10
CD/USB
RDS
Selected track number
) button.
/ (CD/USB / ) button.
/ (CD/USB / ) button.
(CD/