Setting The Job Management; Software Overview - Dell 2335dn - Multifunction Monochrome Laser Printer B/W User Manual

11. Press Cancel (
Ignoring Blank Pages
The printer detects the printing data from computer whether
a page is empty or includes any data. To skip the blank pages
at printing document, follow these steps:
1. Press Scroll ( or
2. Press Scroll ( or
3. Press Scroll ( or
4. Press Scroll ( or
5. Press Select ( ) to save the selection.
6. Press Cancel (

Setting the Job Management

1. Press Scroll ( or
2. Press Scroll ( or
3. Press Scroll ( or
Stored Jobs: Print jobs currently stored in the hard disk. When a user sends a confidential job
from PC to the device, it will hold the job until you release it with your password.
Job Expiration: Limits the amount of time a confidential job stays in the printer before it is
deleted.
Clear Stored Job: You can delete jobs currently stored in the hard disk and RAM disk. If you
select the ALL, all Secure Jobs and Stored Prints are deleted.
4. Set each option as you want and then press Select (
5. Press Cancel (

Software Overview

After setting up your printer and connecting it should read as
to your computer, you must install the drivers and utilities
from the DRIVERS AND UTILITIES CD included with your
) to return to the Standby mode.
) to highlight Setup and then press Select (
) to highlight Machine Setup and then press Select (
) to highlight Print Blank Pages and then press Select (
) to change the setting to Do Not Print.
) to return to the Standby mode.
) to highlight Setup and then press Select (
) to highlight Job Management and then press Select (
) to display the option and then press Select (
) to return to the Standby mode.
).
).
).
).
).
).
Page 29 of 52
).