Select tray (source) and its options, such as paper size and type.
5.
Press OK.
6.
Setting job timeout
When there is no input for a certain period of time, the machine exits the current menu and goes in to the default
settings. You can set the amount of time the machine will wait.
Press Menu (
) on the control panel.
1.
Press the left/right arrow until System Setup appears and press OK.
2.
Press the left/right arrow until Machine Setup appears and press OK.
3.
Press the left/right arrow until Job Timeout appears and press OK.
4.
Enter the time using left/right arrow or numeric keypad.
5.
Press OK to save the selection.
6.
Press Stop/Clear (
7.
) to return to ready mode.