Stacking Papers Firmly - Dell 1135 Mono Laser User Manual

If you are using A5 paper, fold the output tray. Otherwise, printed pages might be mis-aligned or jammed.

Stacking papers firmly

If you use the machine in a humid area, or you are using the damp print media caused by a use a print media that is
damp because of high humidity, the print-outs on the output tray may be curled and may not be stacked properly.
In this case, you can set the machine to use the Paper Stacking function to let print-outs be stacked firmly. But,
using this function will make the print speed slow.
Press Menu ( ) on the control panel.
1.
Press the left/right arrow until System Setup appears and press OK.
2.
Press the left/right arrow until Maintenance appears and press OK.
3.
Press the left/right arrow until Paper Stacking appears and press OK.
4.
Press the left/right arrow until On appears and press OK.
5.
Press Stop/Clear (
6.
Getting a small-sized printout
When you have printed a small sized printout like an envelope or a custom sized printout, it may not be placed on
the output support, due to its small size.
In this case, get the printout pull up the scan unit, get the printout, and close the scan unit again for future use.
) to return to ready mode.