Section 3 - Configuration
Do Not Disturb:
Set the specific line to reject incoming calls.
Line Type:
Set a specific sound intensity for transmitting
sound
Pulse Rate:
Set a specific volume intensity for receiving
sound.
VoIP to PSTN (TX):
Choose DTMF or Pulse for the signalling type
on PSTN lines.
PSTN to VoIP (RX):
The rate for pulse dialing (10 or 20 PPS)
PSTN to VoIP:
When Direct Forward is selected and a phone
number is entered (e.g. the number of the
attendant), all incoming calls which come from
PSTN will be directly forwarded to the pre-entered
number. If IVR is selected, it plays a greeting to
direct the caller to the right extension.
T38:
Enable / disable T.38 support, normally for FAX
users.
AC Impedance:
The type of impedance which is the characteristic
of the connecting PSTN line. Generally, 600
ohm is suitable in most areas and 900 ohm is
used in Europe. Please contact your ISP for
detail.
Apply:
Click Apply to upload the settings.
D-Link DVG-3104MS User Manual
Advanced
Line Settings