Operation Requirements - Canon 7215 - LV XGA LCD Projector Specification

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8 Functional Execution Command
8.1 Format
１. The following format's commands issued form a PC
Pattern1:"CF_COMMAND" [CR]
Pattern2:"CF_COMMAND_%1" [CR]
２. When a projector decoded a received data and ready to receive the next Command, it
will return acknowledgment.
"000" [CR]:（0x06,0x0D）When received Function Execute Command
"nnn" [CR]:Unable to execute any value except "000" value for any specific reason.
３. When received an undecodable data
Returns"?" [CR]
8.2 Transfer Example
When setting projector total command to 1344 by expand command
PC PJ :"CF_TDOTS_1344" [CR]
PC PJ :"000" [CR] ---------------- Reception OK

8.3 Operation Requirements

When the functional execution command is limited, the projector sends an error command
as shown in the table below.
STANDBYMODE
Processing Count Down
Processing Cooling Down
Cooling Down
temperature
Abnormal Temperature
Abnormal Power
(60sECOnds after Power has turned to
abnormal)
Processing Power Save Cooling Down
Processing Power Save
Note): When the projector receives other commands in the above status, they return error
code to show the status.
CF_:Header
COMMAND:Letters
%1:Parameter(Letters)
_:Space（To separate COMMAND and parameter）
See the Ode/ode for its contents
Projector Status
due to abnormal
Available Function Execution Command
C00:POWER ON
C00:POWER ON
(Terminate Count Down)
N/A
N/A
N/A
N/A
N/A
C00:POWER ON
C01:POWER OFF
Page 14