Canon 7215 - LV XGA LCD Projector Specification page 38

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
9.5.8 CR_PC STORECOMMAND
COMMAND "CR_PCSTORE" [CR]
Get the status if MODE1-MODE5 is Free or Stored for PC Adjust.
Each data MODE1-MODE5 will be shown in 5 bytes.
Details
（F:Free, S:Stored）
Acceptable
Required
Response
Data
Unacceptable
9.5.9 CR_SET PC ADJ COMMAND
COMMAND "CR_SETPCADJ" [CR]
Details Get PC signal for current system
Acceptable
Response
Unacceptable
9.6 VIDEO COMMAND
9.6.1 CR_SERSYSCOMMAND
COMMAND "CR_SERSYS" [CR]
Select selected. signal.
When AUTO MODE, it returns by AUTO-detect.
Details
Only
COMPUTER.)
Acceptable
Response
Unacceptable
"000_%a" [CR]
"FFFFF"--- All Free
"SFFFF"--- Only MODE1 is Stored, and others are Free
:
"FFFFS"--- Only MODE5 is Stored, and others are Free
"SSSSS"--- All Stored
"?" [CR]
"000_%1" [CR]
"XGA1"
%1 "HDTV1080"
"MODE1""-- "MODE5" ...Etc.
"?" [CR]
available when Input-VIDEO.
"000_%a" [CR]
"1080I60"-- 1080i 60Hz
"1080I50"-- 1080i 50Hz
"1035I"------ 1035i
"720P"-------- 720p
"575P"-------- 575p
% a
"480P"-------- 480p
"575I"-------- 575i（include composite signal such as PAL）
"480I"-------- 480i（include composite signal such as NTSC）
"NO SIGNAL"--- When No Signal
"101" [CR] -- When Input is PC series
"?" [CR]
(Unavailable when Input
Page
is
38