Final Assembly - NEC LT30 - XGA DLP Projector Installation And Assembly Manual

Installation of Adapter Plate
Flip projector upside down. Using holes indicated
below, attach adapter plate (AA) to projector using
two M4 x 12 mm screws (BB) using 4 mm security
t-wrench (B).
AA
BB

Final Assembly

Note: The projector adapter plate and projector you are installing may differ in appearance from the sample illustrated
below.
Align shoulder on connection block opposite notch in adapter plate. Attach adapter plate to connection block from
projector mount assembly (A) using two #10-32 x 3/8" serrated washer head socket pin screws (C) as shown.
Note: For PAP 35, PAP 40, and PAP 45 adapter plates, use two #10-32 x 3/4" screws provided with adapter plate in
place of screws (C).
NOTCH INDICATES
FRONT OF PROJECTOR
Visit the Peerless Web Site at www.peerlessmounts.com
BB
C
6 of 7
*Notch indicates front of projector.
Close adapter plate (AA) and fasten with thumb
screw (CC).
CC
Retaining spacer
(DD) goes between
adapter plate (AA)
and projector.
CONNECTION BLOCK
SHOULDER
ADAPTER PLATE (AA)
ISSUED: 10-13-05 SHEET #: 055-9445-2 03-31-06
For customer service call 1-800-729-0307 or 708-865-8870.
*