Power On Command; Power Off Command (Immediate Power Off); Computer Command; Volume + Command - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Basic Serial Command Specifications
6.5

POWER ON Command

COMMAND "C00" [CR]
Set Power On.
Detail (Same as the "Power On" key on the projector body / remote controller.)
No operation is started when the projector has been turned on already.
Acceptable
Response
Unacceptable
6.6

POWER OFF Command (Immediate POWER OFF)

COMMAND "C01" [CR]
Turn off the projector and set into standby.
Although "Power OFF" display appears when Power is turned off with ON-OFF
Detail
button of the projector and remote control, this command executes Power OFF
immediately without displaying OSD.
Acceptable
Response
Unacceptable
6.7

Computer Command

COMMAND "C05" [CR]
Select "Computer".
Detail
The projector shows the OSD "Computer" at receiving the command.
Acceptable
Response
Unacceptable
6.8

Volume + Command

COMMAND "C09" [CR]
This command turns up the Volume.
Detail This command works the same as "VOLUME ÿ " button of the remote control.
The projector shows the OSD "Volume" at receiving the command.
Acceptable
Response
Unacceptable
6.9 Volume - Command
COMMAND "C0A" [CR]
This command turns down the Volume.
Detail This command works the same as "VOLUME ÿ " button of the remote control.
The projector shows the OSD "Volume" at receiving the command.
Acceptable
Response
Unacceptable
6.10

Sound Mute ON Command

COMMAND "C0B" [CR]
This command sets "Sound Mute" ON.
Detail This command works only for "Sound-Mute ON" and does not operate
"Sound-Mute OFF" with command pipelining.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
9 / 17