2.1 Turning the Scanner ON /OFF
■ Turning the Power ON
1.
Press "I" side of the main power switch located on the back of the
scanner.
2.
Open the Hopper.
HINT
3.
Press the Power button on the Operator panel.
The power turns on and the Power button lights up.
During initialization, the Function No. Display changes from "8" --> "P" to "1" in order. When
"1" shows, it means the scanner is ready.
8
2.1 Turning the Scanner ON /OFF
• Refer to
"2.2 Opening and Closing the Hopper" on page 10
Hopper.
• Be sure to open the Hopper before turning on the scanner by the Power
button.
OFF
ON
Function number display
to open the