Make A Connection - Panasonic WV-CW504SE Installation Manual

Make a connection

Cautions:
• ONLY CONNECT WV-CW504 TO 24 V AC OR 12 V DC CLASS 2 POWER SUPPLY.
(WV-CW504)
• Be sure to connect the grounding lead to the GND terminal.
Power cord
(WV-CW504: approx. 17 cm)
(WV-CW500: approx. 183.5 cm)
Video output cable
(approx. 16 cm)
l Video output connection
The video output connector is connected to
the monitor or other system devices with a
coaxial cable (locally procured).
The maximum extensible length is shown in the
table.
Type of coaxial RG-59/U
cable (3C-2V)
Recommended
maximum cable m 250
length
l Power connection
Precaution:
The following connections should be made
by qualified service personnel or system
installers in accordance with local electrical
code.
BNC connector
RG-6/U RG-11/U RG-15/U
(5C-2V) (7C-2V) (10C-2V)
500 600 800
To 24 V AC/12 V DC*
Brown (Live)
power supply (WV-CW504)
To 220 V to 240 V AC
Blue (Neutral)
power supply (WV-CW500)
Green/Yellow (GND) To GND**
* When using 12 V DC power supply,
the optional heater unit is unavailable.
BNC connector
• Wire colors & functions
Camera power cord
<WV-CW504>
Wire color 24 V AC
Brown 24 V AC (L) Positive
Blue 24 V AC (N) Negative
Green/yellow To GND
<WV-CW500>
Wire color 220 V to 240 V AC
Brown 220 V to 240 V AC (L)
Blue 220 V to 240 V AC (N)
Green/yellow To GND
Cautions:
• Be sure to connect the GND (grounding)
lead of the camera and grounding terminal
of the power supply when using a 24 V AC
(WV-CW504) or 220 V to 240 V AC (WV-
CW500) power source.
BNC connector
To VIDEO IN
12 V DC
**(not in use)
29