Panasonic WV-SC385 Installation Manual page 29

Symptom
Live indicator keeps on
blinking orange approx. in 2
seconds intervals.
Live indicator never lights up.
Live indicator keeps on
blinking red.
Live indicator lights red.
TM
• UPnP error has occurred since the power is not supplied to the
router.
Turn on the power of the router. Wait until the connections are
established.
• An error has occurred during the port update by the UPnP
tion.
• If the router in use does not support the UPnP
the port forwarding setting for the router. In addition, deactivate the
setting of auto port forwarding for the camera.
TM
• UPnP function of the router is disabled.
Refer to the operating instructions of the router to enable the
TM
UPnP function.
• Is "Off" selected for "Link/Access LED" on the "Basic" page?
Select "On" or "On(Access)" for the indicator setting.
• The camera may be out of order.
Contact your dealer.
• Refer to the readme file on the provided CD-ROM for further infor-
mation after checking the displayed contents of the "Maintenance"
page - the [Status] tab - "Self check" of the setup menu.
• Isn't the write protect switch of the inserted SDHC/SD memory
card set to "LOCK"?
Unlock the write protect switch of the SDHC/SD memory card.
• Hasn't the inserted SDHC/SD card been formatted on a PC?
Use an SDHC/SD memory card formatted on the camera.
Or install the software to format the SDHC/SD memory card on
the PC. Refer to our website (http://panasonic.net/pcc/support/
netwkcam/support/info.html) for further information about the sup-
ported software.
• Isn't the inserted SDHC/SD memory card faulty?
Replace the card with a normal one.
Cause/solution
TM
function, perform
Reference
pages
−
TM
func-
Operating
Instructions
(PDF)
−
Operating
Instructions
(PDF)
−
Operating
Instructions
(PDF)
29