HP RP7 Installation Instructions page 2

HP Retail Integrated
Dual-Head MSR
Installation
Instructions
Copyright © 2012 Hewlett-Packard Development Company,
L.P. The information contained herein is subject to change
without notice. Printed in
691054-002
Installing Drivers for the MSR
The drivers for the MSR are pre-loaded on the HP RP7
Retail System. You can also download the latest drivers
from www.hp.com.
Configuring the MSR
To configure the MSR, refer to the HP Point of Sale
Configuration Guide (available in English only). The
guide is available on the HP factory image of the RP7
system's hard drive and at www.hp.com. To access the
guide on the factory image:
• In Windows Embedded POSReady 2009, select
Start > All Programs > HP Point of Sale Information.
• In Windows 7 or Windows Embedded POSReady
7, select Start > HP Point of Sale Information.
NOTE: Refer to the HP RP7 Retail System Model
7800 Hardware Reference Guide at www.hp.com
for detailed instructions on installing USB modules.
HP RP7 Retail System
CAUTION: This accessory is for use
only with compatible UL Listed host
products that have been evaluated
for the operating altitude up to
3048m/10,000 feet. Use only with
Listed ITE.