Call Forwarding - Busy Line - NEC DTL-6DE-1 - DT310 - 6 Button Display Digital Phone User Manual

CALL FORWARDING - BUSY LINE

DT730/710 DT330/310
To Set
Speaker
STEP 1: Press
STEP 2: If setting for another station, press MULTI-
LINE APPEARANCE.
STEP 3: Press FWD-BY or dial "Call Forwarding –
Busy Line" access code. Receive special dial
tone.
STEP 4: Dial destination station or external telephone
number. Receive service set tone.
STEP 5: FWD-BY LED lights (at your station or at the
DT Series of the multiline station you are set-
ting).
Speaker
STEP 6: Press
Line is set.
FORWARD SET
1:25 PM
Using Soft Key
STEP 1: Press FDB Soft Key. Receive special dial
tone.
STEP 2: Dial destination; wait for service set tone.
STEP 3: "FORWARD SET" is displayed; Call Forward-
key. Receive dial tone.
key. Call Forwarding – Busy
MON 12 JUL 2010
ing – Busy Line is set.
FORWARD SET
1:25 PM
MIC
To Verify (Only For Terminal With LCD)
STEP 1: Press FWD-BY.
STEP 2: Display indicates the station number calls are
forwarded to.
FORWARD
1:25 PM
Note: With Soft Key operation, FDB flashes on the dis-
play.
To Cancel
Speaker
STEP 1: Press
celing for another station, press MULTILINE
APPEARANCE.
STEP 2: Press FWD-BY or dial "Call Forwarding –
Busy Line" cancel code. Receive service set
tone. LED goes out at your station (or the DT
Series of the multiline station).
144
MON 12 JUL 2010
>>>
Forwarding station
2000
MON 12 JUL 2010
key. Receive dial tone. If can-