Maintenance; Customer Responsibilities; Scheduled Maintenance; Storage - Craftsman 24222 - 42 in. High Speed Sweeper Owner's Manual

CUSTOMER RESPONSIBILmTmES
Read and follow the maintenance schedule and the
procedures listed in the maintenance section.
MAINTENANCE SCHEDULE __
Fi,, in dates as you _,-_,_"
complete regular service.
Service Dates
Check for loose fasteners X
Check for worn or damaged parts X X
Lubricate brush shaft bearings _ X ....................
Lubricate wheel bearings X
Ctean Sweeper -- _ X
Clean/Lubricate chain and sprockets X
SCHEDULED MAINTENANCE
Clean the sweeper after each use.
inspect for worn or damaged parts, such as brushes
and wheels.
Lubricate the brush shaft bearing twice a year with a
few drops of light weight oil. See figure 21.
HEIGHT ADJUSTMENT SLOT
COVER
CLEAN S
AND
,S
GREASE
OraLBEARINGS HERE
FLAT WASHER
FIGURE 21
HEX BOLT
FIGURE 22
HEX
LOCK
NUT
FLAT fi
WASHER
_HUB
CAP/_
Every two years, remove the wheels and dean the
sprockets, chains and gears found inside the wheel
housing. After cleaning, lubricate with an even coat of
light grease. To remove the wheel, pop off the hub cap
using a screwdriver and remove the lock nut and fiat
washer. See figure 22.
CLEANING
Clean sweeper housing with a soft brush or cloth.
Clean debris from hopper bag with a brush or broom.
Remove any material which has wrapped around
brushes or ends of brush shaft.
CAUTION: Before storing the sweeper,
always empty the hopper bag to avoid
spontaneous combustion.
Clean the sweeper and hopper bag thoroughly to help
prevent rust and mildew.
To collapse the hopper bag for storage, remove the two
hopper support rods from the rear of the hopper.
Store in a dry area.
12