Advertisement
PARTS INCLUDED IN THE KIT
1. Front Frame Assembly- QTY 1
2. Exhaust Duct - QTY 1
Mounting Rail
3. Bottom
3. Screw A - QTY 11
4. Screw B - QTY 4
CHOOSING A LOCATION FOR
YOUR MICROWAVE OVEN IF
BUILT-IN
Built-In Trim Kit allows for the installation of microwaves
listed below to be built into a cabinet or wall by itself or
over an electric wall oven*.
Microwave Models:
FFMO1611LW, FFMO1611LB, FFMO1611LS
See Illustration 1 for proper location and when building
in above a wall oven. Carefully follow both the wall oven
installation instructions and Electrolux's Built-in Kit
instructions. If building over a wall oven, be sure the
clearance between the wall oven and the microwave
oven is a minimum of 3 inches.
*NOTE:
Trim Kit and microwave can only be built-in
over an electric self-clean or non self-clean
single cavity wall oven.
CABINET OR WALL CUTOUT
Cutout Dimensions
Height (A)
17" (432 mm)
Minimum
Maximum
17
Width (B)
Minimum
24
Maximum
25" (635 mm)
Depth (C)
Minimum
20" (508 mm)
Installation Instructions
– QTY 2
"(438 mm)
1/4
" (629 mm)
3/4
Front Frame Assembly
Exhaust Duct
Illustration 1
Trim Kit Overall Dimensions
27"
Height 18 1/8（460mm）
Width
26 15/16（684mm）
Depth
1 1/16（26.8mm）
2
Mounting Rail
Bottom
30"
18 1/8（460mm）
29 15/16（760mm）
1 1/16（26.8mm）
Advertisement
