QUICK SETUP GUIDE PJ-622/PJ-623/ PJ-662/PJ-663 Mobile Printer For more information on using this printer, be sure to read the Pocket Jet User’s Guide, which is included on the CD-ROM. Warranty information, product registration and other documents can be viewed and printed from the CD-ROM.
General Description Connecting to an AC Power Outlet (Optional) Connect the printer to a nearby AC power outlet to power the printer or charge the rechargeable battery using AC power. Connect the AC adapter to the printer. Connect the AC power cord to the AC adapter.
Installing the While holding onto the ribbon, tilt the rechargeable Ni-MH battery and insert it Rechargeable Ni-MH into the battery compartment. After the rechargeable Ni-MH battery passes the Battery outer edges of the compartment, press it securely into position. Open the battery cover by pressing the cover latch.
Install the Printer Follow the on-screen instructions to install the software. Driver Click [Finish] to close the installation screen. Note ® • Please do not connect the printer to your For Mac OS Users computer via the USB cable until you have installed the printer driver.
Connecting the Printing Computer and Printer For typical printing, use the following procedure. The printer can be connected to your computer via USB cable and Bluetooth Open the document to be printed. (PJ-662/663 only). Instructions for Bluetooth setup can be found in the User’s Guide on the Make sure that the printer is properly CD-ROM.
Page 6
Accessing the User’s ® Guide and P-touch Editor Software User’s Guide ® The User’s Guide and P-touch Editor Software User’s Guide (PJ-623/663 only) can be found on the setup CD-ROM. You can access these documents by selecting the desired document on the top menu screen which appears automatically after you insert the CD-ROM into your computer.