Setting Up Simultaneous Wireless And Wired Connections; Presenting From A Pocket Pc Organizer; Support For Apple Macintosh; Installing The Hp Wireless Presenter-To-Go Software - HP xp8000 - Digital Projector Release Notes

address in the 4th field (assuming the subnet mask is 255.255.255.0). For
example, you could set the IP address to 10.2.3.5.

Setting up simultaneous wireless and wired connections

If you want to set up the projector for both wired and wireless connections, you should
try to have the wired IP address and wireless IP address on different network subnets.
This means the access point and the projector would not be connected to the same section
of the network. You can confirm this with your network administrator.
If you do not have access to two subnets, both projector connections may not be available
in Wireless Presenter-to-Go. However, you should be able to connect to the projector and
make a presentation.

Presenting from a Pocket PC Organizer

After you install HP Wireless Presenter-to-Go software on a Pocket PC handheld
organizer, you have the option of showing the organizer display on the projector screen.
• To show the organizer display, start the Wireless Mirror program, select the
projector you want to connect to, then tap Connect. To remove the Wireless Mirror
screen, tap Hide.
• To change the projected image, open the Wireless Mirror program and select from
the options shown on the screen. For example, you can enlarge and rotate the
projected image.
• To end the presentation, open the Wireless Mirror program, tap the wireless icon,
then tap Disconnect.

Support for Apple Macintosh

You can use an Apple Macintosh computer to manage the projector via the embedded
web server. The projector supports the Safari web browser provided with Mac OS X
version 10.2 and later, in addition to browsers listed in the user's guide.
If you use Internet Explorer to upgrade the projector firmware, you should rename the
DLD file you download from the web so Internet Explorer can process it correctly. After
downloading the file, add ".binary" at end of DLD file name, then upgrade the projector.

Installing the HP Wireless Presenter-to-Go software

After you install HP Wireless Presenter-to-Go on a computer, if you get a presentation
error when starting your first presentation, try rebooting the computer. This step may be
required on some computers.

Upgrading the HP Wireless Presenter-to-Go software

In the future, HP may release new versions of HP Wireless Presenter-to-Go. They will be
available for download at the Support website listed at the beginning of this document.

Upgrading the projector firmware

If you use a network connection to upgrade the projector firmware, your browser must
not block popup windows. Popup windows are required for a successful upgrade.
5