Brother CP-1800 User Manual page 16

3. Operation
3 Press e. The writing surface begins scrolling after 1 to 2 seconds, and then
the front writing surface is printed.
OR
Press d. The writing surface begins scrolling after 1 to 2 seconds, and
then both writing surfaces are printed at the same time.
b
+
4
Tear off the printout by holding the side of the paper and pulling it upward
and across.
b
5
To erase the writing surface, use the enclosed eraser.
b
14
Do not try to erase or touch the writing surface while it is moving.
Do not try to scan and print pages affixed to the writing surface.
Depending on the type of markers used, some colors may not be printed.
Do not touch the paper being fed out of the printer until it has finished
printing.
Always keep the writing surface clean. However, do not wipe the writing
surface with paint thinner, alcohol, benzene, or paper towels.