Checking The Print Head Nozzles; How To Perform A Nozzle Check - Epson PP-100N - Discproducer - DVD Duplicator x2 User Manual

Checking the print head nozzles

If the print head nozzles are clogged, the printing may be faint even though there is ink, or unusual colors may be
printed. The nozzle check prints a pattern for checking the status of the nozzles, and you can check if the nozzles are
clogged by looking at this pattern.

How to perform a nozzle check

There are the following two ways to run a nozzle check.
• Run it using a PC
• Run it using the control panel on the product
Running it from a PC
1 Turn the product on.
2
Set one unprinted disc into Stacker 1.
3
Display the setting screen of the printer driver.
See "Displaying the printer driver screen" on page 63 in this guide for display procedure.
4
Click [Nozzle Check] in the [Utility] tab.
Then, follow the on-screen instructions.
The disc on which the nozzle check pattern was printed is output to Stacker 4 in Standard Mode and External
Output Mode, and it is output to Stacker 3 in Batch Mode.
See "Checking the nozzle check results" on page 137 in this guide for how to check the nozzle check results.
Maintenance
135