Table of Contents
Advertisement
01.
Power (Command:
k a)
To control
Power On/Off
of the TV.
TransmisSiOn [k] Jail ] [Set ID] [ ] [Data] [cr]
Data 00: Power Off
Data 01 : Power On
Acknowledgemen_ [a] [ ][set
ID] []
JOKING] [Data] [x]
In a like manner, if other functions transmit 'FF' data
based on this format, Acknowledgement
data feedback
presents status about each function.
Note: In this model, TV will send the Acknowledge
after power on processing completion.
There might be a time delay between command and
acknowledge.
02. Input
Select
(Command:
x b)
To select input source for TV.
TransmissiOn [x] [b][]
[set ID] [ ] [Data] [cr]
Data 00: DTV (Antenna)
Data 01 : DTV (Cable)
Data 10: Analog (Antenna)
Data 11: Analog (Cable)
Data 20:AV/AV1
Data 21 : AV2
Data40: C0mponent/C0mponentl Data41: Component2
Data 60: RGB-PC
Data 90:HDMI/HDMI1
Data 91:HDMI2
Data 92:HDMI3
Acknowledgemen_
[b][
][Set
ID][
][OKiNG]
[Data] [x]
* Data21,41,91,92
: Except 22LG30DC
03. Aspect
Ratio
(Command:
k c)
To adjust the screen format.
Transmission [k] [c][
][Set
ID][
][Data]
[Cr]
Data 01 : 4:3
06: Set by program
02:16:9
08: Full (Only 22LG3DC
04: Zoom 1
09: Just scan
05: Zoom 2
Reserved
Acknowledgemen_ [c][
][Set
ID][
][OKiNG]
[Data] [x]
04.
Screen Mute
(Command:
k d)
To select screen mute on/off.
Transmission[k] [d][]
[set ID] [ ] [Data] [Cr]
Data 00: Screen mute off (Picture on)
Data 01 : Screen mute on (Picture off)
Acknowledgement[d][]
[Set ID] [ ] [OK/NG]
[Data] [x]
05. Volume Mute
(Command:
k e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
TransmisSiOn[k] [e][]
[Set ID] [ ] [Data] [Cr]
Data 00: Volume mute on (Volume off)
Data 01: Volume mute off (Volume on)
Acknowledgement[e]
[]
[Set ID] []
[OK/NG]
[Data] [x]
06.
07.
08.
09.
10.
11.
Volume Control
(Command:
k f)
To adjust volume.
You can also adjust volume with the volume buttons on
remote control.
Transmission[k]
[f] []
[Set ID][]
[Data] [Cr]
Data Min: 00 - Max: 64 (*transmit
by Hexadecimal code)
_Refer to 'Real data mapping'. See page 98.
Acknowledgement[f]
[]
[Set ID][]
[OK/NG]
[Data] [x]
Contrast
(Command:
k g)
To adjust screen contrast.
You can also adjust contrast
in the PICTURE menu.
Transmission[k]
[g][]
[Set ID] [] [Data] [Cr]
Data Min: 00 - Max: 64 (*transmit
by Hexadecimal code)
_Refer to 'Real data mapping'. See page 98.
Acknowledgemen_ [g][
][Set
ID][
][OKiNG]
[Data] [x]
Brightness
(Command:
k h)
To adjust screen brightness.
You can also adjust brightness
in the PICTURE menu.
TransmiSSion [k] [h][]
[Set ID][]
[Data] [Cr]
Data Min: 00 _ Max: 64 (*transmit
by Hexadecimal code)
*Refer to 'Real data mapping'. See page 98.
Acknbwledgemeni [h][
][set
ID][
][OK/NG]
[Data] [x]
Color
(Command:
k i)
To adjust screen color.
You can also adjust color in the PICTURE menu.
Transmission[k]
[i] [ ] [Set ID][]
[Data] [Cr]
Data Min: 00 _ Max: 64 (*transmit
by Hexadecimal code)
_Refer to 'Real data mapping'. See page 98.
Acknowledgement[i]
[] [Set ID] []
[OKiNG]
[Data] [x]
Tint
(Command:
k j)
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
Transmission[k]
[j][]
[Set ID] [ ] [Data] [Cr]
Data Red: 00 _ Green: 64 (*transmit by Hexadecimal code)
_Refer to 'Real data mapping'. See page 98.
Acknowledgemen_[j
][ ] [Set ID] []
[OK/NG]
[Data] [x]
Sharpness
(Command:
k k)
To adjust screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission[k] [k] [] [Set ID] [] [Data] [cr]
Data Min: 00 _ Max: 64 (*transmit
by Hexadecimal code)
*Refer to 'Real data mapping'. See page 98.
Acknowledgement [k] [ ] [set ID] [ ] [OKiNG]
[Data] [x]
"O
"O
Z
C7
X
97
Advertisement
Table of Contents
