Installing The Battery Pack - D-Link DSN-1100-10 - xStack Storage Area Network Array Hard Drive Hardware Reference Manual

A.2

Installing the Battery Pack

The xStack Storage Array accommodates a shrink-wrapped battery pack. Because write-back
caching is always enabled, we recommend you have a battery to back up the buffer cache
contents.
The battery pack connects to the DSN-1100 controller board using a 3-pin locking connector at
J11 (see Figure A-3 for detailed drawing of its location). The battery itself is attached to the
chassis by means of two 3M Dual Lock re-closable fastener strips, which allow easy field
replacement of the pack, if required.
DSN-1100 Hardware Reference Guide
Figure A-3. Battery Pack Connector (J11) Location
27