Site Considerations; General Considerations; Desktop, Floor Or Shelf Installation - D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive Hardware Reference Manual

Iscsi san array
Hide thumbs Also See for DSN-3400-10 - xStack Storage Area Network Array Hard Drive:
Table of Contents

Advertisement

3.1

Site Considerations

The site where you install the DSN-3000 series storage system can affect its performance.
Therefore, choose a site that conforms to the requirements in the following sections.
3.1.1

General Considerations

Observe the following considerations when selecting a location to install the DSN-3000 series
storage system.
The location should be fairly cool and dry for the acceptable temperature and humidity
ranges.
The location should be free of strong electromagnetic field generators (such as motors),
vibration, dust, and direct exposure to sunlight.
The location must provide sufficient airflow to the front and back of the DSN-3000 series
storage system for correct cooling. Ventilation must be sufficient to exhaust heat from
the rear of the equipment.
The location should offer a power outlet within six feet (1.82 meters) of the DSN-3000
series storage system.
The location should allow for at least six inches (152.3 mm) of space at the front and
back of the DSN-3000 series storage system for ventilation.
Do not place the DSN-3000 series storage system next to, on top off, or below any device
that generates a significant amount of heat or will block the fee flow of air through the
DSN-3000 series ventilation slots.
3.1.2

Desktop, Floor or Shelf Installation

The DSN-3000 series storage system can be mounted on a desktop or shelf. Observe the
following considerations for desktop or shelf installations.
Select a sturdy, level surface that can support the DSN-3000 series storage system. A
fully populated unit weighs approximately 73 lbs. (33 kg.).
Allow enough ventilation space between the DSN-3000 series storage system and any
other objects in the vicinity.
Be sure not to block the air vents on the front and back of the DSN-3000 series storage
system enclosure. Install the cables and power cords according to the procedures in the
following sections.
22
Chapter 3 Installing the DSN-3000 series Storage System

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsn-3400 xstack storageDsn-3200 xstack storageXstack storage dsn-3200Xstack storage dsn-3400

Table of Contents