Mountentirevolumegroup - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual

• Agent and license prerequisites. Requires a local replication license for the storage system on
which the storage volume is located.
• Command result value. None. For a complete list, see
• OS specifics. None.

MountEntireVolumeGroup

Instructs an enabled host to mount all of the replica logical volumes in a replica volume group, as
appropriate.
If the original (source) logical volume was mounted (when it was replicated) then the replica logical
volume is mounted. If the original logical volume was not mounted then the replica is not mounted.
• When replicated, the original volume group must have at least one mounted logical volume. If the
volume group has no mounted logical volumes, or has only raw logical volumes, the command
will fail.
• The host volume group replica must have been created and received an assignment in a previous
step of the same job.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
MountEntireVolumeGroup ( %new_vg_name%, %source_vg_name%, %mount_point_prefix% )
New VG Name (%new_vg_name%). Select or enter a name for the new host volume group replica. (The
replica created in a previous step of the same job)
Source VG Name (%source_vg_name%). Select the name of the source host volume group whose
properties are to be applied to the new volume group.
Mount Point Prefix (%mount_point_prefix%). Enter the prefix to be applied to the mount points, if any. For
example entering /backup will add /backup to mount points for all logical volumes in the volume group.
When mounting to the same host as the original, you must include a mount point prefix. When mounting
to a different host than the original, a prefix is optional.
If you mount multiple replicas of a volume group, you must use a unique mount point prefix for each
replica.
Examples
AIX
HP-UX
Linux
OpenVMS
Solaris
Tru64 UNIX
Windows
Comments
• Associated validation commands.
• Agent and license prerequisites. Requires a host agent.
• Command result value. Destination volume group name (UNC). For a complete list, see
command result
• OS specifics. Yes. See examples above.
132
Job concepts, templates and commands
MountEntireVolumeGroup ( "cats_vg", "vg02", "/backup" )
MountEntireVolumeGroup ( "cats_vg", "vg02", "/backup" )
MountEntireVolumeGroup ( "cats_vg", "vg02", "/backup" )
Not applicable
MountEntireVolumeGroup ( "cats_vg", "vg02", "/backup" )
MountEntireVolumeGroup ( "dom01_RV1", "\\HostA2\dom01", "new_" )
Not applicable
ValidateHostVolumeGroup
values.
command result values.