Installation Procedures - All Deployments - HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Installation Manual

Installation Procedures -
All Deployments
Installing and configuring your MSA includes the following steps, each of which
is illustrated in
■
■
■
■
■
■
■
■
■
■
■
Note:
■
■
■
HP StorageWorks 1500 Modular Smart Array Installation Guide
Figure 1
Step 1: Review and confirm your
Step 2: Prepare your
Step 3: Install MSA option
Step 4: Rack the MSA and the storage
Step 5: Install the hard
Step 6: Prepare your
Step 7: Install the HBA in your
Step 8: Prepare your
Step 9: Connect the
Step 10: Power on the
Step 11: Configure your
HP recommends installing and configuring your MSA in the sequence of steps listed
in this guide. Specific dependencies exist, and if you deviate from this sequence, you
may have to uninstall and then reinstall the device.
If a supplier is installing or configuring the MSA for you, provide them with this
guide and verify that they complete the information in "Worksheets" on page 107.
For information about HP installing and configuring your MSA, see
on page 13.
and discussed in this chapter:
plans, page 17
site, page 34
kits, page 36
enclosures, page 37
drives, page 43
servers, page 44
servers, page 45
switches, page 46
cables, page 47
devices, page 57
MSA, page 61
1
"Getting help"
15