Expresscard Assembly - HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Maintenance And Service Manual

ExpressCard assembly

Description
ExpressCard assembly
Before removing the PC Card assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Primary hard drive (see
b. WLAN module (see
c. Optical drive (see
drive on page
d. Switch cover and keyboard (see
e. Display assembly (see
f. Top cover (see
g. System board (see
Remove the ExpressCard assembly:
1. Turn the system board upside down, with the front toward you.
2. Remove the two Torx T8M2.0×5.0 screws that secure the ExpressCard assembly to the system
board.
88 Chapter 4 Removal and replacement procedures
Battery on page 46).
Primary hard drive on page
WLAN module on page
Optical drive on page
67)
Switch cover and keyboard on page
Display assembly on page
Top cover on page 79)
System board on page
55)
52)
60) or Secondary hard drive (see
73)
86)
Spare part number
492567-001
Secondary hard
62)