Table of Contents
Advertisement
Copying all data
You can transfer all the data in a digital camera to the
viewer in a single operation.
1.
Select
USB Device in the Home screen using
the Up or Down key, then press the OK key.
2.
Select Backup USB device to Viewer using the
Up or Down key, then press the OK key.
Note:
Connecting a digital camera through the USB hub is not
supported.
Transfer time varies depending on your digital camera,
but generally, 1 GB of data will take approximately 5 to
10 minutes.
12
Transferring the Data to the Viewer
Copying particular data
You can select specific data to copy to the viewer.
1.
Select
USB Device in the Home screen using
the Up or Down key, then press the OK key.
2.
In the USB Device screen, select Browse USB
Device using the Up or Down key.
3.
Press the OK key to show the data on the USB
device.
4.
Press the Menu key to display the pop up menu,
select Backup using the Up or Down key, then
press the OK key.
5.
Use the 4-way ring and the
checkmarks in the check boxes of files to back up,
then press the OK key to complete.
key to enter
Advertisement
Table of Contents
