HP 234664-002 - ProLiant - ML330T02 Installation Instructions Manual page 11

NOTE:
Refer to the Windows SBS 2003 R2 documentation for help on
planning the installation.
Click Next on the Welcome to the Microsoft Windows SBS 2003 R2 Setup Wizard window. The
12.
Suite Requirements window displays if your system meets all the requirements to install Windows
SBS 2003 R2.
If the system meets all the requirements to install Windows SBS 2003 R2, the Suite Requirements
13.
window displays. Click Next, and the License Agreement displays.
However, if the system does not meet all the requirements, click Cancel to exit this portion of setup.
Take corrective action by adding required hardware and/or reconfigure your base OS. To take
corrective action, connect necessary components or make modifications, select Back, and select
Next to re-evaluate system.
Review the License Agreement. If you agree, select the I agree radio button and click Next.
14.
Verify the Name, Organization, and Computer Name on the Product Identification window. Then
15.
enter the 25-digit key for your Microsoft Windows Small Business Server R2 CD-ROM and your
Microsoft Outlook CD-ROM. Click Next.
The Automatic Logon Information window prompts you for your password if you would like Setup
to log you on automatically after the system restarts.
Select your preference and click Next.
16.
Fill out your address information on the Company Information window and click Next.
17.
Fill out your telephone information on the Telephony Information window and click Next.
18.
NOTE:
Enter this information even if you do not have a modem
installed.
On the Server Network Card Configuration window, verify/enter your IP Address, Subnet Mask,
19.
and Default Gateway; and click Next.
In the New Domain Information window, enter your Full DNS name for new domain and Domain
20.
NetBIOS name; and click Next.
On the Data Folders windows, select folders in which to store data for each component, and click
21.
Next. The Windows Server 2003 configuration folder choices include:
Networking configuration
•
Domain configuration
•
Terminal services
•
Network identification
•
Setup starts to copy files, automatically configures your Active Directory, and restarts the server.
On the Component Selection window, select and modify components to fit your custom solution,
22.
and click Next.
If installing Windows SBS 2003 R2 Premium Edition, choose whether you want to enable caching
23.
on the ISA Server Cache Drives window and click Next.
Select IP address ranges to load into the Local Address Table on the ISA Server Construct Local
24.
Address Table window and click Next.
11