Turning The Display On And Off - HP D5063H - Pavilion F50 - 15" LCD Monitor User Manual

5 Click the Advanced button.
6 Select the Monitor tab.
7 Click Properties.
8 Select the Driver tab.
9 Click Update Driver.
10 Select the Install from a list or specific location
box and then click Next.
11 Select the Don't search box and then click Next.
12 Click Have Disk.
13 Click Browse.
14 Find and open the hp_vf52.inf file on the
CD-ROM disc in the Drivers directory, and then
click OK.
15 Click Next to install the selected monitor.

Turning the Display On and Off

You use the Power button, the button on the right in
the button panel on the front of your monitor, to turn
the monitor on and off.
When the monitor is on, the Power indicator light
(LED) near the Power button illuminates. The light is
green when both the monitor and PC are active, it is
amber when the monitor is in a reduced power
mode, and the light is off when the monitor is off.
6
user's guide
If your PC supplies power saving signals to the
monitor, the monitor power management features
reduce power consumption to low levels when your
PC goes into its power-saving mode. See
"Minimizing Power Consumption" on page 7 for
more information.
If your PC doesn't use industry standard power-save
signaling techniques, you can reduce power
consumption by turning off the display when it
won't be used for an extended period. You can turn
the display off even if you leave your PC running.
NOTE:
Because of the technology used in LCD
panels, screen savers will not prolong the life of your
display. So if the display will not be used for an
extended period, be sure to turn it off.
WARNING: To completely disconnect
power from your display, you must
remove the power cord from the wall
outlet and then remove the power cable
from the display.