Epa Energy Star Compliance; Power Cord Set Requirements - HP D5063H - Pavilion F50 - 15" LCD Monitor User Manual

EPA Energy Star Compliance

Monitors that are marked with the
®
Energy Star Logo meet the
requirements of the EPA Energy
Star program. As an Energy Star
Partner, Hewlett-Packard
Company has determined that this product meets the
Energy Star guidelines for energy efficiency. Specific
details on using the Energy Saving features can be
found in the energy saver or power management
section of the computer manual.

Power Cord Set Requirements

The monitor power supply is provided with
Automatic Line Switching (ALS). This feature allows
the monitor to operate on input voltages between
100-120V~ or 200-240V~.
The power cord set (flexible cord or wall plug)
received with the monitor meets the requirements for
use in the country where you purchased the
equipment.
If you need to obtain a power cord for a different
country, you should purchase a power cord that is
approved for use in that country.
The power cord must be rated for the product and
for the voltage and current marked on the product's
electrical ratings label. The voltage and current rating
of the cord should be greater than the voltage and
current rating marked on the product. In addition,
the cross-sectional area of the wire must be a
minimum of 0.75 mm² or 18AWG, and the length of
the cord must be between 6 feet (1.8 m) and 12 feet
(3.6 m). If you have questions about the type of
power cord to use, contact your HP authorized
service provider.
A power cord should be routed so that it is not likely
to be walked on or pinched by items placed upon it
or against it. Particular attention should be paid to
the plug, electrical outlet, and the point where the
cord exits from the product.
21
user's guide