1.3.2 Bottom view
Mounting hook: Use the mounting
hook to install the device on
concrete or wooden surfaces
using a roundhead screw.
Air vents: These vents provide
ventilation to the device.
1.3.3 Rear view
Ethernet port: This port connects the supplied
RJ-45 plug and cable.
DC IN socket: This socket connects the power
adapter plug.
Reset button: Press this button for more than
five seconds (in AP or Ethernet mode) to load
the default values. In Ethernet adapter mode,
press this button for less than five seconds to
connect to the first saved wireless connection
in the profile table. See page 3-15 for the reset
button function in Ethernet mode.
1-4
Ethernet port
DC IN socket
Chapter 1: Product introduction
Mounting
hook
Air vents
Reset button