Firmware Upgrade - Asus WL-330GE - Wireless Access Point User Manual

Firmware Upgrade

This page reports the Flash Code (Firmware) version installed in the ASUS
802.11g AP. Periodically, a new Flash Code is available for the ASUS 802.11g
APs on ASUS's Web site. You can update the ASUS 802.11g AP's Flash Code
using the Firmware Upgrade page under the Advanced Setup menu of the Web
Manager. If you are experiencing a problem with your ASUS WLAN equipment, a
Technical Support representative may ask you to give your device's Flash Code
(Firmware) version.
Note: The firmware upgrade takes approximately 60 to 90 seconds. When the
firmware upgrade is completed, you will be directed to the home page.
4-30 Chapter 4: Configuration