Security Menu - HP 4310s - ProBook - Core 2 Duo 2.1 GHz Maintenance And Service Manual

Computer Setup

Security menu

✎
Some of the menu items listed in this section may not be supported by your computer.
Select
Setup BIOS Administrator Password
User Management (requires a BIOS administrator password)
Password Policy (requires a BIOS administrator password)
HP SpareKey
Always Prompt for HP SpareKey Enrollment
Fingerprint Reset on Reboot (If Present)
Allow Reset of HP ProtectTools security keys
Change Password
HP SpareKey Enrollment
DriveLock Passwords
Automatic DriveLock
Disk Sanitizer
System IDs
5–4
To do this
Set up a BIOS administrator password.
■ Create a new BIOS user account.
■ View a list of ProtectTools users.
Revise password policy criteria.
Enable/disable HP SpareKey (enabled by default).
Enable/disable HP SpareKey enrollment (enabled by default).
Reset/clear the fingerprint reader ownership (select models
only; disabled by default).
Enable/disable reset of HP ProtectTools security keys
(disabled by default).
Enter, change, or delete a BIOS administrator password.
Enroll or reset HP SpareKey, which is a set of security
questions and answers used if you forget your password.
■ Enable/disable DriveLock on any computer hard drive
(enabled by default).
■ Change a DriveLock user password or master password.
✎
DriveLock settings are accessible only when you enter
Computer Setup by turning on (not restarting)
the computer.
Enable/disable Automatic DriveLock support.
Run Disk Sanitizer to destroy all existing data on the primary
hard drive or the drive in the upgrade bay.
Ä
If you run Disk Sanitizer, the data on the selected drive
is destroyed permanently.
Enter a user-defined computer asset tracking number and
ownership tag.
Maintenance and Service Guide