HP 4310s - ProBook - Core 2 Duo 2.1 GHz Maintenance And Service Manual page 93

Hp probook 4310s notebook pc and hp probook 4311s notebook pc - maintenance and service guide
Hide thumbs Also See for 4310s - ProBook - Core 2 Duo 2.1 GHz:
Table of Contents

Advertisement

Removal and replacement procedures
Remove the system board:
1. Release the ZIF connector 1 to which the USB board cable is attached, and then disconnect the USB board
cable from the system board.
2. Disconnect the Bluetooth module cable 2 from the system board.
3. Disconnect the modem module cable 3 from the modem module.
4. Release the SD Card Reader slot bezel 1 by pressing in on it, and then remove the bezel 2.
5. Release the two ZIF connectors 3 to which the two power button board cables are attached, and then
disconnect the cables from the system board.
4–48
Maintenance and Service Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Probook 4311s

Table of Contents