Selecting The Optical Audio Output Format; Using The Dolby Digital Dynamic Range Control Feature - Toshiba 39L22U User Manual

Selecting the optical audio output format

You can select the optical audio output format when you connect a
®
Dolby
Optical Audio Out terminal (see
system" on page
To select the optical audio output format:
1 Press the MENU button, and then open the Sound menu.
2 Highlight Audio Setup, and then press the ENTER button.
3 In the Dolby Digital Output Format field, select either Dolby
Digital or PCM, depending on your device.
4 To save the new settings, highlight Done, and then press the
ENTER button.
To reset the settings to the factory defaults, highlight Reset,
and then press the ENTER button.
Using the Dolby
You can further compress Dolby
you to switch from digital to analog broadcasts at the same dynamic
range.
To use the Dolby
1 Press the MENU button, and then open the Sound menu.
2 Highlight Audio Setup, and then press the ENTER button.
3 In the Dolby Digital Dynamic Range Control field, select
either Compressed or Standard. When Standard is selected,
the audio outputs with minimal compression.
4 To save the new settings, highlight Done, and then press the
ENTER button.
To reset the settings to the factory defaults, highlight Reset,
and then press the ENTER button.
NOTE
Digital decoder or other digital audio systems to the TV's
30).
®
Digital Dynamic Range Control feature
®
Digital Dynamic Range Control:
❖
This feature is available when the TV is tuned to a digital RF
channel with the Dolby
❖
®
The Dolby Digital Dynamic Range Control will function in
relation to Optical Output Format (PCM mode).
Using the TV's features
Adjusting the audio
"Connecting a digital audio
®
Digital dynamic range, allowing
®
Digital signal.
81