Selecting The Optical Audio Output Format - Toshiba 39L4300UM User Manual

Selecting the optical audio output format

You can select the optical audio output format when you connect a
®
Dolby
DIGITAL AUDIO OUT terminal.
Audio Format
1 Press the SETUP button.
2 Select Sound > Digital Audio Output > Audio Format and press
the OK button.
3 Press the p / q (arrow) buttons to select Auto or PCM.
4 Press the EXIT button.
Audio Delay
1 Press the SETUP button.
2 Select Sound > Digital Audio Output > Audio Delay and press the
OK button.
3 Press the p / q (arrow) buttons to select Auto or Manual.
Auto:
Manual: You can manually adjust the audio signal timing to meet
4 Press the EXIT button.
Delay Adjustment
1 Press the SETUP button.
2 Select Sound > Digital Audio Output > Delay Adjustment and
press the OK button.
3 Press the t / u (arrow) buttons to adjust the audio signal timing (0 –
250ms) to meet the video signal timing.
4 Press the EXIT button.
NOTE
Digital decoder or other digital audio systems to the TV's
This mode automatically adjusts the audio timing to meet
the video timing.
The time lag might be large between the image and sound
depending on the connected equipment (amplifier etc.). In
that case, select Manual.
the video signal timing.
This feature is grayed out when Audio Delay is in Auto.
❖
A time lag will occur when the video signal or audio signal is changed.
❖
Adjust the timing accordingly.
When adjusting the timing, turn down the volume of the AV equipment
❖
used as far as possible.
Picture and Sound Controls
Adjusting the audio
107