Scanning A Duplex Document - Brother 8085DN - DCP B/W Laser Software User's Manual

Adjust Image
• Brightness
• Contrast
c
Click Start.
When scanning has finished, the image appears in your graphics application.

Scanning a duplex document

a
Load your document.
b
Check Duplex(two-sided) Scanning and choose Long-edge binding or Short-edge binding.
c
Adjust the following settings, if needed, in the Scanner Setup dialog box:
Resolution
Scan Type
Document Size
Adjust Image
• Brightness
• Contrast
d
Click Start.
Note
• You cannot adjust the scanning area.
• Duplex scan is not supported by the DCP-8080DN and MFC-8480DN.
• Duplex scan is not available for legal size paper.
• Duplex scan is available from the ADF only.
Scanning
9
9
165