10First Side Document Scanning Position Sensor Pcb Assy, Second Side Document Scanning Position Sensor Pcb Assy (Duplex Scanning Models Only), Adf Cover/Document Detection Sensor Pcb Assy - Brother DCP-7080 Service Manual

9.12.10First Side Document Scanning Position Sensor PCB ASSY, Second
Side Document Scanning Position Sensor PCB ASSY (Duplex scanning
models only), ADF Cover/Document Detection Sensor PCB ASSY
(1) Remove the first side document scanning position sensor PCB ASSY while pushing the
rib A. Disconnect the first side document scanning position sensor PCB harness (WH)
from the first side document scanning position sensor PCB ASSY.
(2) Peel the film. Remove the second side document scanning position sensor PCB ASSY
while pushing the rib B. Disconnect the second side document scanning position sensor
PCB harness (BL) from the second side document scanning position sensor PCB ASSY.
(Duplex scanning models only)
(3) Remove the ADF cover/document detection sensor PCB ASSY while pushing the rib C.
Disconnect the ADF cover/document detection sensor PCB harness from the ADF
cover/document detection sensor PCB ASSY.
ADF cover/document detection
sensor PCB harness (WH)
Rib C
Harness routing: Refer to
ADF cover/document
detection sensor PCB ASSY
Second side document scanning
position sensor PCB harness (BL)*
Rib B*
"8. ADF unit".
First side document scanning
position sensor PCB harness (WH)
Second side document
scanning position sensor
PCB ASSY*
Fig. 3-50
3-55
First side document scanning
position sensor PCB ASSY
Film
Rib A
* Duplex scanning models only.
Confidential