Brother DCP-7080 Service Manual page 51

Error
Description
codes
There is no paper set in the manual
8C00 feed slot on the manual feed slot fix
mode.
8D01 ―
8D02 ―
The paper size setting for the machine
8E01 is other than A4, Letter, Legal or Folio
when receiving fax.
Detected that the size of the paper set
to paper tray was over 10 mm shorter
8E02
than letter size when receiving fax or
printing a list/report.
8E03 ―
8F01 ―
8F02 ―
8F03 ―
9001 ―
When printing from the paper tray, the
size of paper set in the paper tray
9002
does not match the size specified by
the driver.
9003 ―
9004 ―
9005 ―
9102 ―
9103 ―
9104 ―
9105 ―
9200 ―
9301 ―
When printing from the paper tray, the
9302 paper feed sensor detected that there
was no paper set in the paper tray.
9303 ―
9304 ―
9305 ―
9306 ―
Detected that paper has run out
9307 during receiving fax or printing a list/
report.
9401 ―
9402 ―
9403 ―
Refer Error
to: codes
2-48 9404 ―
9501 ―
9502 ―
2-48 9503 ―
2-48 9504 ―
9505 ―
9601 ―
9608 ―
A tray set to duplex printing-
9701 incompatible size was specified in
duplex printing.
9702 ―
2-49 9703 ―
9704 ―
9705 ―
9801 ―
9802 ―
9803 ―
9804 ―
9901 ―
9902 ―
9903 ―
2-49 9A01 ―
9A02 ―
9A03 ―
9C01 ―
9C02 ―
2-49 9C03 ―
9C06 ―
9C07 ―
Image processing cannot be
completed correctly because the
number of pixels required for image
A000
processing is insufficient in the
scanned data for the second side of
the document.
2-16
Description
Confidential
Refer
to:
2-50
2-50