Brother DCP-7080 Service Manual page 199

(6) Remove the CIS carriage from the CIS drive belt.
CIS carriage
(7) Remove the first side CIS flat cable attached on the back of the CIS carriage from the
double-sided tape.
Note:
• Be sure to replace the double-sided tape with a new one, after taking off the first
side CIS flat cable from the double-sided tape.
(8) Remove the first side CIS flat cable from the document scanner bottom cover ASSY.
Double-sided tape
CIS carriage
CIS drive belt
Fig. 3-61
First side CIS flat cable
Document scanner bottom cover ASSY
Fig. 3-62
3-66
Confidential