Lcd - Brother DCP-7080 Service Manual

9.15.3 LCD

(1) Remove the rubber key L and the rubber key R from the panel unit.
(2) Release the hooks A to remove the backlight guide from the panel unit.
(3) Release the hooks B to remove the LCD and the diffusion film from the backlight guide.
(4) Remove the LCD sheet from the panel unit.
(5) Remove the address label from the panel unit.
Diffusion film
LCD
Backlight guide
Positioning pins
Assembling Note:
• When assembling the LCD, attach the rubber key R and rubber key L in this order.
• Make sure that the positioning pins are inserted to the holes of the rubber key L/R.
• DO NOT bend the hooks when removing them. If the hooks are deformed, the LCD
may not be attached to the backlight guide or the backlight guide may not be attached
to the panel unit.
Rubber key R
Hook B
Positioning
pins
Rubber key L
Hook B
Hooks A
Positioning pins
LCD sheet
Fig. 3-58
3-63
Positioning pins
Panel unit
Address label
Confidential