Display Lan Connection Status (Function Code: 33) - Brother DCP-7080 Service Manual

1.3.11 Display LAN connection status (function code: 33)

<Function>
This function is used to check the connection status of the wired LAN.
<Operating Procedure>
For models without keypad
(1) Press the [▲] or [▼] key in the initial
state of maintenance mode to display
"MAINTENANCE 33" on the LCD, and
press the [OK] key. One of the following
items is displayed on the LCD
depending on the wired LAN connection
of the machine.
(2) When the [Stop] key is pressed, the
machine returns to the initial state of
maintenance mode.
LCD
Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
For models with keypad
(1) Press the [3] key twice in the initial state
(2) When the [X] or [Stop] key is pressed,
LAN connection status
100B-FD
100B-HD
10B-FD
10B-HD
Not connected
5-19
of maintenance mode. One of the
following items is displayed on the LCD
depending on the wired LAN connection
of the machine.
the machine returns to the initial state of
maintenance mode.
Confidential