Lan Connection Status Display (Function Code: 33) - Brother FAX-2840 Service Manual

1.3.11 LAN connection status display (Function code: 33)

<Function>
This function is used to check the connection status of the wired LAN. The display items are
shown in the table below.
LCD
Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
<Operating Procedure>
(1) Press the [3] button twice in the initial state of the maintenance mode.
The wired LAN connection status as shown in the table above is displayed on the LCD.
(2) When the [Stop/Exit] button is pressed, the operation is canceled, and the machine
returns to the initial state of the maintenance mode.
LAN connection status
100BASE-T Full Duplex
100BASE-T Half Duplex
10BASE-T Full Duplex
10BASE-T Half Duplex
Not connected.
5-18
Confidential