9.6
Fuser unit cover
(1) Hold the both knobs on the fuser unit cover, and pull down the fuser unit cover to your
side.
(2) Pull the fuser unit cover in the direction of the arrow to remove it from the two bosses,
and then remove it from the machine.
Boss
Assembling Note :
• When attaching the fuser unit cover, set the roller parallel. (Check the position of anti-
curl levers. Refer to
Knob
Fuser unit cover
Fig. 3-15
Fig. 2-8 in Chapter
2.)
3-32
Knob
Boss
Fuser unit cover
Confidential