9.39 Develop drive sub ASSY, Develop gear joint/52
(1) Remove the taptite cup S M3x6 SR screw and the three taptite bind B M4x12 screws to
remove the develop drive earth harness and the develop drive sub ASSY.
1
Taptite bind B M4x12
Develop drive earth harness
3
2
Develop drive sub ASSY
Taptite cup S M3x6 SR
Earth plate laser L
Fig. 3-62
Assembling Note :
• When assembling the develop drive sub ASSY, tighten the three taptite bind B M4x12
screws in numerical order written on the plate.
• Be careful not to bend the earth plate laser L.
3-72
Confidential