Brother FAX-2840 Service Manual page 178

(4) Disconnect the connectors of the center thermistor harness ASSY and side thermistor
harness ASSY from the eject sensor PCB ASSY.
(5) Release the harnesses of the center thermistor harness ASSY and side thermistor
harness ASSY from the guides of the main frame L ASSY.
Harness routing : Refer to
Side thermistor
harness ASSY
Fig. 3-42
"11. Fuser unit".
3-54
Guide
Center thermistor
harness ASSY
Side thermistor
harness ASSY
Eject sensor PCB ASSY
Center thermistor harness ASSY
Eject sensor PCB ASSY
Main frame L ASSY
Guides
Confidential