9.4
Fuser Unit
(1) Remove the Taptite bind S M3x8 screw from the Fuser cover R.
(2) Release the Hook to remove the Fuser cover R from the Main body.
Main body
(3) Disconnect the two Connectors (CN1, CN2) from the Paper eject sensor PCB ASSY.
Connector
Paper eject sensor
PCB ASSY
Fuser cover R
Fig. 3-12
CN1
CN2
Fig. 3-13
3-38
<Back side>
Hook
Taptite bind S
M3x8
Connector
Confidential