Brother 09055CDN Service Manual page 340

(10) Remove the Forced develop release link from the Develop forced release part.
(11) Release the two Hooks to remove the Top drive ASSY from the Base frame unit.
Base frame unit
Hook
Top drive ASSY
<Left side>
(12) Disconnect the Fuser develop motor flat cable.
Assembling Note:
When the Fuser develop motor flat cable is replaced, be sure to fold and assemble the flat
cable as shown in the figure.
45°
7
25 32
Harness routing: Refer to
Develop forced release part
Fig. 3-231
125
157
Fig. 3-232
" Top Drive ASSY"
3-157
Forced develop release link
Pin
Develop forced release part
Hook
Fold down FFC along with the solid line
Fold up FFC along with the dotted line
45°
41
198
(mm)
101 7 9
299 315
306
Confidential